reply to Dampier
Re: SB6141 Can't access modem config manager Let's see if your config file change by then. The OP is from NYC I believe.
DampierPhillip M Dampier
said by bluepoint:I can't see this as a billing issue. Why would the billing system discriminate against a config file? As far as TWC is concerned, the billing system shows the modem on your account and a code that differentiates customer-owned from leased equipment. That code tells billing when to charge and when not to charge. I don't see a technical reason why this would ever result in different configuration files.
Let's see if your config file change by then. The OP is from NYC I believe.
I have since forgotten whether other readers are reporting this or just the one. If it is just this person, I would suspect a "previously enjoyed" modem with a firmware version from another cable system that doesn't want people in the config -or- even more likely, a misfired config file intended for a different modem or a technical fault with how the config file was implemented.
There is a button in the config panel that will reset all defaults, but that is of course little help to someone who can't get there without a password. What interests me is the guidance attached to the use of the button:
Resetting the cable modem to its factory default configuration will remove all stored parameters learned by the cable modem during prior initializations. The process to get back online from a factory default condition could take from 5 to 30 minutes. Please reference the cable modem User Guide for details on the power up sequence.
5 to 30 minutes? Wow. It's annoying Motorola does not have a hardware way of doing this to bypass any existing config.
Phillip M. Dampier
Editor, Stop the Cap!
It's not what I'm thinking. Looking at your firmware, it's not from TW. Watch it when TWC push a new firmware.
Good news - it has been FIXED! You should no longer have this problem, TWC have updated my modem with the proper provision file.
I now have full access to the config manager
Orchard Park, NY
Good to here, thank you for the follow up.
New York, NY
reply to ajsfuxor
Did TWC notify you or did you just have the update pushed? I'm still locked out of mine, but will try a power cycle later and see if it updates. (currently listening to internet radio with my morning caffeine).
Update-Tried a power cycle and no dice. I'll give L3 a call in a few days after Sandy has had a chance to clear out.
Can you please give me the telephone number for TW L3 support.
Lower level support is poorly trained and cannot address the problem.
I am having a similar problem with dropouts after installing an Sb 6141.
I can access the configuration menu including an error log that lists multiple entries that I cannot properly interpret.
Time Warner claims they cannot access my 6141 remotely which is strange since the unit works properly in between dropouts.
New York, NY
reply to JayKl
Sorry, I've been out of touch for a bit. Phone is 866-506-0218. Also, just a general update. After being minus service since Monday night, a corrected provisioning file was not pushed when I powered back up this am. I'm still locked out of the config. Once things stabilize around here, I'll be getting in touch with L3 again.
New York, NY
reply to fekix
Yes that's the # for L3.
As an update to all else concerned, I spoke with L3 this am. The fix is in testing stage and will be pushed once it's verified as good. I've now been included in the test group and will have it pushed sometime today. Also, the agent I spoke with was aware of this thread.