|reply to Frink |
Re: Generator doesn't work with Direct Vent Hot Water Heater
said by Frink:Look at where your utility's neutral (Entrace cable) connects to your panel, then look for another big wire (But likely to be no bigger than #6, either colored green, or bare copper) attached right next to it (And that they aren't isolated from each others, so they probably are on the same metal bar). That should be your grounding conductor that goes to your ground electrode (copper pipe or rod).
Honestly I am not sure where the ground is in my home. I have not found any rods in the ground around my house, and I know my home pretty well. The only thing I have seen that comes close are green wires connecting to my water lines...definitely something I will be looking into when things are looking better.