dslreports logo
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
1158
share rss forum feed

Gigabyte2004

join:2004-09-12
Morganton, NC

Phone Cat5/6 distribution panel

The phone wiring in the house isn't the best,so I am just going to run all new wires to each room with either cat5 or cat6 cable.I have both from previous projects.
I plan on running one main cable from the NID to a spot in the crawl space underneath the house.I want to use some sort of panel,hub,etc so I can then just run wires to each room from that main area.Will help with any problems that may occur in the future. I'm not sure as to what I should use. Suggestions?


Balzer

join:2000-12-18
Owasso, OK
»www.phonegeeks.com/phonvidwirce. ··· rce.html


LazMan
Premium
join:2003-03-26
canada
reply to Gigabyte2004
Should be able to get an 8 position 66 multiplier block for about 10 bucks; or for $20 at 'Big Orange' - this will do the trick... 1 in, 8 out...

»www.homedepot.com/h_d1/N-5yc1v/R ··· Id=10051

LLigetfa

join:2006-05-15
Fort Frances, ON
kudos:1
reply to Gigabyte2004
Take a look at this thread.

»Splitting Coax (F-Type RG6) 16-Way Preferably Rack-Mounted?

Gigabyte2004

join:2004-09-12
Morganton, NC
reply to Gigabyte2004
Thanks guys.

Gigabyte2004

join:2004-09-12
Morganton, NC
Anybody have a diagram or info on how I should wire it to a 66 block?

Gigabyte2004

join:2004-09-12
Morganton, NC
reply to Gigabyte2004
Any diagrams or more info on how I should wire it up to a 66 block? I forgot to add that one of the lines will give me my signal to the DSL.

So,I'll run one wire each to the two rooms,and then I'll run two wires to the other room for the other phone and the DSL.