said by ke4pym:
If you wanna get really freaky:
Find a preamp with 300-ohm input. Then get some of the old school twin lead cable to run from the antenna to the pre-amp. Skip the balun all together. Switch to 75-ohm coax after the preamp on the mast.
Twin lead has some of the best signal interference rejection out there.
You *have* to use stand offs though. The cable can't come anywhere near your mast.
Careful with the extra antennas. Those can induce multipath issues. But most modern tuners are pretty well equipped to handle that kind of thing now.
Meh, I prefer a inline line powered preamp screwed right into the matching transformer on the antenna.--
CompTIA Network+ Certified