how-to block ads
|
|
Share Topic
 |
 |
|
|
|
scooper
join:2000-07-11
Youngsville, NC
kudos:2 Reviews:
 ·Time Warner Cable
 ·Embarq Now Centu..
| reply to garys_2k
Re: [CallCentric] SOLVED! CC Settings on PAP2T Ok - you're settings are working for you - now let me have you chew on this -
I set the SIP port on my PAP2T to 5070, I'm using the srv.callcentric.com and I have a setup for CallWithUs on the other PAP2T port (for which I did manually set that to 5060). I've had no problems registering (well, at least as long as CC is doing good at fighting off the DDOS attacks), and otherwise my settings are like yours.
I did set the PAP2T's DNS servers to the defaults as handed out by my ISP, in my case Time Warner Cable, and it's been fine.
I still maintain that some peoples issues are caused by their internet connection to CC not yet being fixed (this is an ISP issue, not so much a CC issue), especially those who were in the affected area of Sandy. | |
garys_2kPremium
join:2004-05-07
Farmington, MI Reviews:
 ·callwithus
·Callcentric
| said by scooper:Ok - you're settings are working for you - now let me have you chew on this -
I set the SIP port on my PAP2T to 5070, I'm using the srv.callcentric.com and I have a setup for CallWithUs on the other PAP2T port (for which I did manually set that to 5060). I've had no problems registering (well, at least as long as CC is doing good at fighting off the DDOS attacks), and otherwise my settings are like yours.
I did set the PAP2T's DNS servers to the defaults as handed out by my ISP, in my case Time Warner Cable, and it's been fine.
I still maintain that some peoples issues are caused by their internet connection to CC not yet being fixed (this is an ISP issue, not so much a CC issue), especially those who were in the affected area of Sandy.
I also have CWU on one line, set to 5060, and had had my CC line set to 5060 and it caused the reboot. MAYBE that's the problem, but some time back I had F9 on one line, set to 5060, as well as CC on the other, also set to 5060, and there were no problems. All of my reboots started when I tried the SRV settings with CC.
Maybe setting the CC to 5070, instead of blank, would help, maybe not. I might give it a try later tonight when it's less likely we'll be using the phone and a reboot wouldn't cause a problem.
As for this being an ISP issue at my end, I did see some of the threads talking about submitting a ticket and discussing what ISP the users were connecting through. I hope someone posts some specifics of those discussions because I'm not sure what ATA settings could be impacted by which ISP is being used. The DNS settings? Maybe, but I tried CC's suggested settings and ended up with one set to their suggested server and the other to my ISP's primary server. In any case the only way to stop the reboots was to change that SIP port setting. | | |
|
|
