dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
558
share rss forum feed


JeffinNOLA

@cox.net

[LA] 4 upstream channels

My modem sees 4 upstream channels, but not bonded. I do have 4 bonded downstream. Is this a sign of things to come? Will they merge them together in the near future?


digiblur
Premium
join:2002-06-03
Louisiana
What do you mean by it sees them but won't bond them? Do you reboot and keep checking the frequency?

If you are talking about the number next to the modulation scheme, that's not the number of channels. I haven't figured out what that number is, it's not the number of channels available though.


kv2009

join:2009-09-14
Kenner, LA
reply to JeffinNOLA
Cox runs 4 upstream frequencies through my area in Kenner but upstream bonding isn't turned on right now. We've had four upstream frequencies for quite a while now, probably over a year.


JeffinNOLA

@cox.net
reply to digiblur
If the modem as to be rebooted for any reason, it will detect channels 1, 2, 3, or 4. Mostly channel 4. All 4 won't show up at the same time. I have a SB6121. I think there have been node issues in my area. Upstream noise is still showing up but not as often.

Channel ID 2
Frequency 28050000 Hz
Ranging Service ID 707
Symbol Rate 2.560 Msym/sec
Power Level 42 dBmV
Upstream Modulation [3] QPSK
[2] 16QAM
[3] 64QAM

Ranging Status Success

I have a lot of errors too.

Channel ID 229 230 231 232
Total Unerrored Codewords 277525396 276825829 276825743 276826131
Total Correctable Codewords 120 400 138 124
Total Uncorrectable Codewords 1970 1308 1800 1586


JeffinNOLA

@cox.net
reply to JeffinNOLA
My power went out for 1 hour, but when it came back, my upstream power was a bit higher. My connection is also pretty good, at the moment. Could something from the power company cause low signals for a cable company? It would seem that they feed off of each other.

Download Speed: 20481 kbps (2560.1 KB/sec transfer rate)
Upload Speed: 4255 kbps (531.9 KB/sec transfer rate)
Latency: 10 ms
Sunday, November 11, 2012 3:29:03 PM

Rob_
Premium
join:2008-07-16
Mary Esther, FL
kudos:1
Cool! Maybe were next..!


kv2009

join:2009-09-14
Kenner, LA
reply to JeffinNOLA
Yeah, Cox runs those four frequencies to spread around the bandwidth. Some people will lock to one, some will lock to another. But when upstream bonding is turned on, anyone with a D3 modem will lock to whatever Cox has set up to bond, so long as as the signal quality permits. If Cox ups the 2.56Msym/sec to 5.12Msym/sec on these 64QAM channels, we'll see quite a large speed increase on upload. If they bond those upstream channels, then you're talking a massive speed increase, if Cox decides to up the throughput cap that is.


JeffinNOLA

@cox.net
What ever fix cox did tonight is great. It's super fast fast! Nice Job!