It's been a while since I had to do this and before I do it ...
I have a MT link AP Bridge to station wds
If I change the frequency at the AP bridge node, and the SSID set on the station WDS doesn't change, will the station wds node find the SSID on the new frequency automatically okay and register with the AP bridge on the new freq? I don't want to do any mounting climbing today to redo that station wds node but I need to change the freq of the link.
The client should follow as long as you dont change the SSID or channel width on the AP.
If your going change SSID or Channel width I suggest you change it first on the client then on the AP side to match.. You need to make sure that your freq are clear in any case, you dont want to lose the link and have to drive out to make changes especially if its far away..