dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
4
share rss forum feed


Gone
Premium
join:2011-01-24
Fort Erie, ON
kudos:4
reply to AnonFTW

Re: It's not over coax...

They utilize RFoG for television, phone and regular cable modem services that operate on converted coax at the premises, but I would be willing to bet that a 250/250 symmetrical service is utilizing its own IP backend over the fibre and not the optical modulated RF stream. The currently-deployed DOCSIS specifications out there don't support 250Mbit/s of upstream bandwidth, which sort of rules that out.


InvalidError

join:2008-02-03
kudos:5

said by Gone:

The currently-deployed DOCSIS specifications out there don't support 250Mbit/s of upstream bandwidth, which sort of rules that out.

It would be possible if Rogers had an R&D partnership with some equipment manufacturers for DOCSIS 3.1.

But Rogers' Internet page for 250/250 is "Rogers Ultimate Fibre" and is only "available in select areas" so it looks like we're talking actual fiber.


Gone
Premium
join:2011-01-24
Fort Erie, ON
kudos:4

There's probably no point in even bothering with DOCSIS 3.1 if you're going straight fibre.


34764170

join:2007-09-06
Etobicoke, ON
reply to InvalidError

said by InvalidError:

It would be possible if Rogers had an R&D partnership with some equipment manufacturers for DOCSIS 3.1.

DOCSIS 3.1 the spec won't be out until Q2 of next year. You won't see chipsets for CPE until early 2014. CMTS gear even later.

It is more likely they've connected these very limited customers to a Metro Ethernet network as Comcast has done.


Gone
Premium
join:2011-01-24
Fort Erie, ON
kudos:4

said by 34764170:

It is more likely they've connected these very limited customers to a Metro Ethernet network as Comcast has done.

This.

34764170

join:2007-09-06
Etobicoke, ON

said by Gone:

said by 34764170:

It is more likely they've connected these very limited customers to a Metro Ethernet network as Comcast has done.

This.

I had assumed they were rolling out this new speed tier to more than just ONE neighborhood in Toronto. Only servicing one neighborhood would make it extremely easy to build and/or extend a Metro Ethernet network to said neighborhood.


Gone
Premium
join:2011-01-24
Fort Erie, ON
kudos:4

Well, one has to take note that "Toronto" probably means the GTA, and that something like this is probably available up in York Region rather than in Toronto proper itself. Rogers will most likely eventually roll this out to anywhere that they have fibre directly to the home, which I would assume is going to be a *lot* of homes up in York Region and a smaller number in Peel and Durham. When one considers that Futureway was doing fibre directly to new homes in York, Peel and Durham back in the early 2000s and using media converters, and that Rogers bought them in the mid-2000s, and that Rogers also has their own deployments all throughout new development in their territory (which is most of the growth in Ontario as it is) Rogers probably has the potential to service a lot more customers this way than Bell does.

Rogers aren't the only ones, either. Nearly all of Binbook is fibre through Shaw, and Cogeco has swaths of it in Ancaster, Oakville, Burlington and Thorold (and I'm going to assume Niagara Falls as well). They just haven't bothered to do anything with it - yet.