|reply to sempergoofy |
Re: Educate me on Radon
Look at the manometer that measures the subslab pressure before and after adding the screen. There should be a limit on it, make sure the screen doesn't make the pressure rise above the limit.
This is the website where I saw the weather resistant screen installed yesterday.
I note, however, that this installer seems to have also put a tee type rain deflector at the top of the exhaust. That's the part that seems to most controversial based on other readings as it has the potential to redirect the air for possible reintroduction instead of maximizing the dispersal with a straight shot. I dunno.--
nohup rm -fr /&
hambone42Peace, through superior firepowerPremiumReviews:
Thanks to all who replied and to sempergoofy
for that installation link.
The "condensation bypass" seems a little odd. I understand the explanation, but I would think that the drain holes in the cap below the tee would slightly compromise the fan's ability to keep a vacuum under the slab. Most of the systems I've seen don't have that feature; perhaps it's only required in colder climates?--
Sarcasm is the Body's Natural Defense Against Stupidity