dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
22
share rss forum feed


Brano
I hate Vogons
Premium,MVM
join:2002-06-25
Burlington, ON
kudos:10
reply to bds85466

Re: ZyXEL PK5001Z Modem dropping exactly every 15 minutes

Is this a PPPoE connection?


bds85466

join:2012-11-17
Waconia, MN

said by Brano:

Is this a PPPoE connection?

Are you asking if it's an ethernet connection to the router? Yes.

Forgive me I'm not fluent in networking.

Still haven't found lingo to Nail the connection in the firmware....on to another day...gotta get to bed.

Thanks for your help!


Brano
I hate Vogons
Premium,MVM
join:2002-06-25
Burlington, ON
kudos:10
Reviews:
·TekSavvy DSL
·Bell Fibe

Check Advanced -> WAN settings and post screenshot please.
Going by this »qwest.centurylink.com/internethe···ock.html you should have PPPAutoConnect enabled.


bds85466

join:2012-11-17
Waconia, MN

said by Brano:

Check Advanced -> WAN settings and post screenshot please.
Going by this »qwest.centurylink.com/internethe···ock.html you should have PPPAutoConnect enabled.

I'll do this when I get home and post it.


nschwen

@embarqhsd.net

I was having this very same issue, and read this thread with great interest. Also I was having trouble with some devices connecting via WiFi (would connect one day, but be unable the next, even in the same room as the router). This and other issues has convinced me the router firmware is basically just bad. Not horrible, but quite buggy.

I was able to get a stable connection by turning off the WiFi and putting the device into 'Bridge' mode (found under Advanced->WAN settings). This basically turns it into a simple modem, no router capabilities at all. This mean however you need a different device to handle router functions. I had a CradlePoint MBR 95 from my days of using wireless modems (very solid performer). Worked without any configuration. Just ran a network cable from one of the network ports on the Zyxel to the WAN port on the CradlePoint, and poof, internet. It's been stable for the last 24 hours, zero connection drops while gaming or using work VPN (both were a real pain with the drops every 15 mins).

Once you set the Zyxel into Bridge mode, you can't connect to it's GUI pages any longer; it's just a dumb modem now. To get it back to 'normal', you have to do a hard reset using the pinhole button on the back. Both bridging and resetting are detailed on Zyxel's website (via videos hosted on YouTube).

If Zyxel comes out with a firmware update I may give it another try, because I did like some of the monitoring features they offer. But until I feel like rolling the dice again, this setup is working great so far!