dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
35
share rss forum feed

LFHC

join:2012-11-04
Collinsville, VA
reply to cestevespr

Re: Bridging pk5001z to Linksys e1500

As far as the VPI and VCI that should not need to be changed to bridge that is just for the modem and dsl circuit connection.On the PK5001z you should turn wireless off and turn on transparent bridging then you will want to connect the PK5001Z to the WAN port of your Linksys router from here it should start to work automatically make sure you unplug power from both devices and start them up at the same-time just for good measure and If you are using PPPOE then you will need to enter that information into your Linksys router on the the Linksys router you should have a place to change your internet connection type by default it should be set to automatic configuration DHCP. BUT if you are using PPPOE you will need to change that setting to PPPOE and enter your login information when you set the PK5001Z to transparent bridging if you were using PPPOE then it would have had the information below where you changed the option to transparent bridging