reply to Paulg
Re: Monitoring Bandwidth/Traffic Inline in K12 setting Was going to ask "are you sure about that," but then I dug up a few articles indicating the 3750s only track the 1st packet of the flow,
and the 29xx series switches will only do SNMP load-based polling.
Really dumb question, are they 3750s, 3750Gs, or the newer 3750Xs?
Do you have access to any other layer3 device within the network _IF_ Netflow or similar was needed?
Tell me I'm not crazy when I read this article that the 3750X has an addin module that does NetFlow -- »www.plixer.com/blog/netflow/cisc···support/
Yes, the 3750X has an uplink module (PN: C3KX-SM-10G) that provides netflow, but only on the two uplink ports.