| reply to Iamien
Re: [Speed]Getting far less than 25mbit with SB6121 Wired, yes? Can you post a ShaperProbe result? If you're in a new location with a wireless connection, you might be getting interference. If that's the case, try switching channels. |
|
Iamien
join:2006-04-09
Elkhart, IN | DiffProbe release. January 2012. Build 1008.
Shaper Detection Module.
Connected to server 74.63.50.40.
Estimating capacity:
Upstream: 6573 Kbps.
Downstream: 10549 Kbps.
The measurement will take upto 2.5 minutes. Please wait.
Checking for traffic shapers:
Upstream: Burst size: 10180-10270 KB;
Shaping rate: 4218 Kbps.
Downstream: Measurement aborted due to high packet loss rate.
For more information, visit: http://www.cc.gatech.edu/~partha/diffprobe
It is a wireless connection, office is on second floor and the drop comes into living room. My wifi analyzer phone app says I am on the best channel possible for my router, channel 11(8 out of 10 stars). |
|
| Try channel 6 then 9, just for kicks... |
|
 NetFixerFrom my cold dead handsPremium
join:2004-06-24
The Boro
 ·Comcast Business..
 ·Vonage
 ·Cingular Wireless
·Comcast
1 edit | reply to Iamien
Try connecting a PC to the router using an Ethernet cable. If that does not get the full speed, connect the PC directly to the modem, then power cycle both the modem and the PC.
I suspect that one or both of those tests will produce the correct speed results.
--
We can never have enough of nature.
We need to witness our own limits transgressed, and some life pasturing freely where we never wander. |
|
