 More FiberPremium,MVM join:2005-09-26 West Chester, PA kudos:28 | reply to cchhat01
Re: Actiontec MI424WR FIOS N Router REV. I Switch to a cat5 connection between the ONT and the router and put the Actiontec behind your router. -- There are 10 kinds of people in the world; those who understand binary and those who don't.
|
|
 cchhat01Dr. Zoidberg join:2001-05-01 Elmhurst, NY Reviews:
·RCN CABLE
·Earthlink Cable ..
| said by More Fiber:Switch to a cat5 connection between the ONT and the router and put the Actiontec behind your router. I should have noted that I am not just subscribed to FIOS Internet, it is also FIOS TV and Digital voice. I dont care much about the voice as the line will most likely never be used, but I do care about the FIOS TV service.
Do you still recommend to switch the ONT to Ethernet from COAX? I am certainly a total newbie with all this MoCA stuff so things are a bit confusing.
C -- "Look at me, I'm Dr. Zoidberg, homeowner." |
|
 More FiberPremium,MVM join:2005-09-26 West Chester, PA kudos:28 | said by cchhat01:Do you still recommend to switch the ONT to Ethernet from COAX? Yes. Much simpler than the dual-bridge configuration.
I recommend option 7 in the trade-offs FAQ: »Verizon Online FiOS FAQ »What are the tradeoffs between the various router configurations
Be aware that neither option 7 nor the double bridge (option 5) support remote access to DVR, on-screen caller id or VZ's CPE management interface. -- There are 10 kinds of people in the world; those who understand binary and those who don't.
|
|
 cchhat01Dr. Zoidberg join:2001-05-01 Elmhurst, NY Reviews:
·RCN CABLE
·Earthlink Cable ..
| Okay but my problem is that I don't have the tools to drill holes in my house to run a CAT5 wire from the router to the ONT. Again, I want do this as a last measure.
I'll repeat my question: Does the Rev I support Double Bridging? I am going through the router's Configs and its GUI has changed in ways from the original formats to Display things such as "Broadband Connection (Ethernet/Coax)" instead of two individual connections "Broadband Connection (Ethernet)" and "Broadband Connection (Coax)"
If I can make do without Running a CAT5 cable, I would gladly do this. I am just not sure whether to make heads or tails of the instructions as they are written and how they apply to Revision I.
I appreciate your help.
C -- "Look at me, I'm Dr. Zoidberg, homeowner." |
|