 EdrickI aspire to tell the story of a lifetimePremium
join:2004-09-11
Woburn, MA | Cisco Cisco SG500X VLAN with UC320 and UniFi WiFi Quick question,
I've got a Cisco UC320 with SPA525 Phones, a Cisco SG500X 48Port Switch and UniFi WiFi Access points.
What I need to do is setup the WiFi Access points with a Second SSID that some of the phones will connect to. My question is what do I need to do to enable the VLAN for the port the UniFi is connected to? Basically one Wireless SSID will be on VLAN1 for Data and the other Wireless SSID needs to be VLAN100 for Voice. So do I need to configure the port on the Cisco Switch to allow both VLANs?
--
Edrick Smith
Independent Film & Broadcast Producer
»edricksmith.com |
 tubbynetreminds me of the danse russePremium,MVM
join:2008-01-16
Chandler, AZ
kudos:1 | not sure about the configuration level details of the uni-fi access points -- but yes. you'll need to set up a trunk to the ap's -- permit only the required vlans -- then created tagged subifs on the access point that tie the ssid to the vlan tag.
q.
--
"...if I in my north room dance naked, grotesquely before my mirror waving my shirt round my head and singing softly to myself..." |
