Your wiring advice might be made a bit clearer if you replace the word "wire" with the phrase "wire pair" (unless you are actually talking about doing something that makes a mockery of Ohm's law as I have always interpreted it). If the OP is not familiar with Ohm's law, and only moves a single wire for each telco circuit, things are not likely to work very well.
And FWIW, not everyone is going to be able to easily view your uploaded MS proprietary file Schematic.mht (just in case that file clarifies your instructions).
We can never have enough of nature.
We need to witness our own limits transgressed, and some life pasturing freely where we never wander.