|reply to TheHox |
Re: 6.6mile PTP link - hardware?
IMO the powerbridges are not worth it, I would use 2 NanobridgeM5 25dbi dishes, if your fresnel zone is clear you can push quite a bit of traffic over these.
Depending on what speeds you need, you can do 20, 30, or 40 mhz channel width assuming the high gain will keep interference low.
FWIW 20mhz typically can get me 50+mbps, 30/40 both get me closer to 70-80+.
Power bridges are also not certified for DFS useage, Nanobridges are. But at 6miles I dont know that this would matter.