http://www.dslreports.com/forum/zyxel-usg-200configuration-27792086 en Sat, 18 May 2013 20:16:11 EDT Sat, 18 May 2013 20:16:11 EDT http://www.dslreports.com/forum/Re-zyxel-usg-200configuration-27811449
I was able to get the server B online. NAT wasn't configured right.

Thanks for you help.]]> http://www.dslreports.com/forum/Re-zyxel-usg-200configuration-27811449 Tue, 11 Dec 2012 19:30:42 EDT http://www.dslreports.com/forum/Re-zyxel-usg-200configuration-27809448
What is it that server B on the DMZ is not successfully doing? Its interaction with LAN1 will be mediated by the firewall in the USG. I don't think it needs a static route for that function. As for external access, ZyXel publishes somewhere in the user guide or notes how to set up a server in the DMZ accessible from the web. I am pretty sure that the ISP has to send you an internet routable IP address for the server to be accessible. There could be a difficulty from the first router being in the LAN1 subnet. But basically, the USG has to know that the external IP address being connected to translates to the DMZ address 192.168.3.33.

kirby]]> http://www.dslreports.com/forum/Re-zyxel-usg-200configuration-27809448 Tue, 11 Dec 2012 11:01:16 EDT http://www.dslreports.com/forum/Re-zyxel-usg-200configuration-27808143

network map.pdf

]]> http://www.dslreports.com/forum/Re-zyxel-usg-200configuration-27808143 Tue, 11 Dec 2012 00:36:07 EDT http://www.dslreports.com/forum/Re-zyxel-usg-200configuration-27792337
kirby]]> http://www.dslreports.com/forum/Re-zyxel-usg-200configuration-27792337 Wed, 05 Dec 2012 20:19:32 EDT http://www.dslreports.com/forum/zyxel-usg-200configuration-27792086
I spent many hours, studying and trying different configurations and ended up in a worse off situation. doesn't feel very good.

I would like to reset everything and start from scratch.

Could anyone make it a bit easier for me please?

The equipment that I'm trying to connect and shape access to are listed below.

bridged - router with VOIP - 192.168.1.254 (connected to zywall via cable)

zywall 200 USG -192.168.1.1 (connected to APE via cable)

bridged - Airport Extreme - 192.168.1.3, gateway 192.168.1.1, DNS 192.168.1.2

NAS - 192.168.1.101 (connected to APE via cable), Internal access only

private server - 192.168.1.2 : network account server, DNS server, (connected to APE via cable, internal access only)

public server 192.168.1.33 : network account server, VPN, wiki, web site

network printer 192.168.1.69 (WI-FI)

all the rest are connected to Airport via WI-FI

Any help will be much appreciated.
Thank you.]]> http://www.dslreports.com/forum/zyxel-usg-200configuration-27792086 Wed, 05 Dec 2012 19:14:01 EDT