http://www.dslreports.com/forum/Time-Machine-DHCP-and-Nat-Ubee-Router-in-Bridge-mode-27802289 en Mon, 20 May 2013 17:59:14 EDT Mon, 20 May 2013 17:59:14 EDT http://www.dslreports.com/forum/Re-Time-Machine-DHCP-and-Nat-Ubee-Router-in-Bridge-mode-27804334
It seems that the TM cannot handle DHCP by itself. When I have it configured to the TM doing DHCP and the Ubee using just NAT, or in Bridge mode, the TM doesn't seem to be able to keep up a constant connection between the two.

As of now, the wifi from the TM is dropping out every 10 minutes. It's currently hooked up with the TM in bridge mode and the Ubee handling everything.]]> http://www.dslreports.com/forum/Re-Time-Machine-DHCP-and-Nat-Ubee-Router-in-Bridge-mode-27804334 Sun, 09 Dec 2012 20:52:01 EDT http://www.dslreports.com/forum/Time-Machine-DHCP-and-Nat-Ubee-Router-in-Bridge-mode-27802289
The problems started occurring here. I figured the settings would be these:

Ubee
--
Configuration mode:
Bridge DHCP: Off

TM
--
IPv4: 192.168.100.2
Subnet Mask: 255.255.255.0
Router Address: 192.168.100.1
DNS Servers: 8.8.8.8, 8.8.4.4
Router Mode: DHCP and NAT

But using those settings, my TM says "Double NAT", so I have to change it all around to the default settings of the Ubee using NAT.

This leads me to believe bridge mode doesn't actually turn off NAT...]]> http://www.dslreports.com/forum/Time-Machine-DHCP-and-Nat-Ubee-Router-in-Bridge-mode-27802289 Sun, 09 Dec 2012 00:53:44 EDT