republican-creole
site Search:


 
    All Forums Hot Topics Gallery






how-to block ads


 
Search Topic:
Uniqs:
750
Share Topic
Posting?
Post a:
Post a:
Links: ·Posting Rules ·Automotive Links ·Automotive FAQ ·Forum News
AuthorAll Replies

batsona
Maryland

join:2004-04-17
Ellicott City, MD
Reviews:
·Vonage
·Verizon FiOS

[Tech] Very squeeky front brakes...

I have a new/used 07 Grand Cherokee 3.7L v6. During inspection, they replaced the front rotors, and I could tell they were new. Unknown if they replaced the pads at the same time. But...

I do know that they squeek like crazy! I know it's not the rear rotors, because I can pull up on the handbrake gently, and they're silent. Also, I'm one of those grandma drivers -- I'm not a jackrabbit driver that floors it away from stoplights, then stands on the brake like an elephant at the next light.. I drive very gently...

What might be the cause of this? Do OEM / semi-metalic pads have to be matched to a certain type of rotor etc etc?


Warzau
Premium
join:2000-10-26
Naperville, IL
kudos:1

I remember when I had a civic they used metallic pads and they squeal like a banshee, they had to use semi-metallic.


batsona
Maryland

join:2004-04-17
Ellicott City, MD

Ah... I bet its worth mentioning that my wheels are turning black with that graphite dust. With previous cars, when we had the rotor / pads changed, they magically stopped producing such amounts of this dust...



TA63
ST215W
Premium,MVM
join:2000-11-23
there
kudos:2

reply to batsona
Put an OEM set of pads on, the noise will go away.

You might get lucky with a set of quiet aftermarket pads, but it is a bit like playing Russian roulette.

--
The talented hawk speaks French.



Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18

reply to batsona
The pads were likely put on dry and are likely missing the shims. If you pull the pads, lightly sand them on a flat board and use brake assembly lube on all metal to metal contact surfaces including between the pads and the shims (unless the shims are riveted to the backing) and put it all back together that will 90% of the time fix it.

You will also need to re-burnish the pads.

Tech Tip: Brake Burnishing Procedures for New Brake Pads or Shoes
»www.brakeandfrontend.com/issue/a···id=40440
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?


Wednesday, 19-Jun 05:39:01 Terms of Use & Privacy | feedback | contact | Hosting by nac.net - DSL,Hosting & Co-lo
over 13.5 years online © 1999-2013 dslreports.com.
Most commented news this week
Hot Topics