dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
share rss forum feed

zippoboy7

join:2006-06-18
USA
reply to SteveCon

Re: Missing red "add" text on "Port Forwarding&qu

The add is in the first row of buttons at the top, right under the drop-down boxes where you actually define the port forwarding rules.


SteveCon
IBEW 2222 Boston, MA
Premium
join:2004-09-02
Boston, MA
Click for full size
THIS is what I am expecting. It is nowhere to be found. It is impossible to edit on my screen - you must delete & recreate to do that. All of the instructions from VZ, Actiontec, and Youtube videos that I have seen all talk about this screen - not the one I get.


birdfeedr
Premium,MVM
join:2001-08-11
Warwick, RI
kudos:9
What firmware revision is on your Rev.A router? Should be 4.0.16.1.56.0.10.14.4, then you'll get what you showed in your original post.

You're looking for the first step in port forwarding like you'll see here with 2009 firmware. »Re: Port Forwarding Stopped Working. No longer available.

Yes, there is no editing an existing rule. You can only delete then recreate.


SteveCon
IBEW 2222 Boston, MA
Premium
join:2004-09-02
Boston, MA
The Rev A router has been returned, so I don't know what the firmware rev level was. There is a ton of legacy (pre 2009 firmware) help articles out there. I tried to find out some info on firmware levels - but didn't learn very much.