 dnoyeBFerrous Phallus
join:2000-10-09
Southfield, MI
 ·Comcast
| [Anveo] G711U vs. G729 Is there any noticeable benefit to using G729, or is it enough to keep the basic plan with G711U? When I have a connected call, everything sounds fine as it is.
Thanks for your opinions.
--
dnoyeB
"Then said I, Wisdom [is] better than strength: nevertheless the poor man's wisdom [is] despised, and his words are not heard. " Ecclesiastes 9:16
|
|
 Arne BolenHappy Anveo customerPremium
join:2009-06-21
Planet Earth
kudos:4 | IMHO G.711 gives a better audio quality compared to G.729. However, I have never tested G.729 with Anveo, I use only G.711.
--
My VoIP News |
|
 ground
join:2008-01-16
Toronto, ON | reply to dnoyeB
g.711 sounds the best, but it consumes the most bandwidth ~11KB/sec
g.729 sounds acceptable, but the bandwidth it consumes is much less ~4KB/sec
So basically if your connection can handle g.711 without dropouts or other issues, keep it as it is.
Use g.729 only if you have limited bandwidth or voice quality problems with g.711. |
|
OZOPremium
join:2003-01-17
kudos:2 | reply to dnoyeB
If you're experiencing dropouts, G711U is the worst coded at recovery, G729 is better and SILK is the best.
--
Keep it simple, it'll become complex by itself... |
|
