|reply to Marshal |
Re: FTTH - Remplacer Connection Hub par...
Voici un "update".... c'est en anglais pcq j'ai poste sur les forums de pfsence, mais surement ici qqun connait.. ?
Tonight, with pfsence, I was able to setup the wan connection to use both vlan, and get them working. I create a wan interface named WANINET for my pppoe connection, and WANIPTV for the Iptv connection.
I added, in the routes, a route for the multicast (188.8.131.52/4) and 10.0.0.0/8 network to go through the WANIPTV port.. I also setted up the IGMP proxy, and added 2 rules in the FW to allow traffic (184.108.40.206/8 and 10.0.0.0/4) to the WANIPTV network..
My internet connection work, and IPTV too.. im able to watch tv, all channels.. BUT.. only one thing.. after 10 seconds, the TV tell me that there is a loss of signal. I change channel and it come back, for another 10 seconds..
Je suis donc jamme la..
Rogers - iPhone 4s 32gb