dslreports logo
    All Forums Hot Topics Gallery


how-to block ads

Search Topic:
share rss forum feed


Waretown, NJ
reply to SallyWingles

Re: [Connectivity] Net Drops Constantly

OKay, today I got so sick of it so tried again (bypassing the router). Unplugged the router, plugged my modem cable into my PC, and using a cat6 cable.

So far its been going very well, but I cannot say for sure if the modem has dropped connection for a few seconds here and there because I cannot actually see more detailed LOGS for my modem. I wish I could

BTW, here is my current readings from my modem:

Model: Cisco DPC3008
Vendor: Cisco
Hardware Revision: 1.0
Serial Number: 244591653
MAC Address: bc:c8:10:2d:de:24
Bootloader Revision: 2.3.1_R3
Current Software Revision: d3000-v302r125532-120517a-L2VPN-CMCST
Firmware Name: d3000-v302r125532-120517a-L2VPN-CMCST.bin
Firmware Build Time: May 17 11:31:04 2012
Cable Modem Status: Operational
Wireless Network:

Cable Modem State
DOCSIS Downstream Scanning: Completed
DOCSIS Ranging: Completed
DOCSIS DHCP: Completed
DOCSIS TFTP: Completed
DOCSIS Data Reg Complete: Completed
DOCSIS Privacy: Enabled

Downstream Channels
Power Level: Signal to Noise Ratio:
Channel 1: 0.6 dBmV 39.6 dB
Channel 2: 1.0 dBmV 39.8 dB
Channel 3: 0.9 dBmV 39.5 dB
Channel 4: 1.0 dBmV 39.5 dB
Channel 5: 0.5 dBmV 39.3 dB
Channel 6: 0.5 dBmV 39.2 dB
Channel 7: 0.2 dBmV 39.2 dB
Channel 8: 0.0 dBmV 39.4 dB

Upstream Channels
Power Level:
Channel 1: 50.8 dBmV
Channel 2: 50.0 dBmV
Channel 3: 51.0 dBmV
Channel 4: 0.0 dBmV

Just to note, I did see an upstream level yesterday of 52, but its been average of 50-51.

My Router is the Belkin F5D8236-4 v1 Wireless N and I've ran this router without any problems for the last three years. I am very curious as to what can cause issues suddenly come up with a router. Can routers go bad in such a short time? I take great care of my electronics, its has not been dropped, hit, or anything like that. Nothing new has been added either. Can anyone enlighten me?

I would like to understand this issue before I go out and spend $100+ on a new router? I have a large family, and with all the laptops, gaming systems, phones, tablets in this house I really need a router... but making sure this current router is actually on the fritz is my main concern at the moment. Just to clarify ... I myself use a hardwired PC, it was the entire network losing Internet (both hardwired and wireless)

I do have a Comcast tech coming out tomorrow, and this is mainly because we had flooding in the crawl space, all the way up to the flooring, and the insulation was soaked, we removed it all, and will be adding new insulation this weekend, so its perfect timing for the tech to come here. I have great concerns for the splitter/cable work the tech did under my house years ago. The way I see is we might as well have them do it now, and not have to call them out later.

So, in the meantime, I am trying to educate myself on what can cause a router to drop net connection up to 40 times and hour? The only changes here was a new modem (docsis 2 to docsis 3) and the flooding from Superstorm Sandy here in the Barnegat area.

I'm hopeful someone can offer some ideas while I wait.

Newtown, PA

Your upstream is at the upper end of acceptable and is very likely responsible for your problems. The Comcast tech should be able to determine where the problem is occurring.