|reply to Voodoo |
Re: [DSL] P-663HN-51 WAN Settings Help
I have a normal DSL line and static DSL line with frontier.
A good friend of mine has a bonded set up and I played around with his modem a little bit. I know that with Frontier you can only set your modem to Bridge if your CO is set to allow it. In most cases now Frontier no longer Bridges modems unless they are static set ups. The DSL modems have the ability to switch over to routed bridge which is like a virtual bridge but i am unsure if the bonded will play nice that way.
As far as your settings here is what i saw that you may want to change.
Make sure the VPI/VCI setting is 0/35
make sure you have PPPoE selected with your correct username and password. Make sure your MTU value is 1492 or you wont beable to get to some secure sites.
and take the check out of the bridged check box you have down at the bottom.
I hope this helps. And remember I have only played around a little with the bonded modems so im no pro but i was able to get my friends to work after changing the settings around for fun.