http://www.dslreports.com/forum/Best-Frequency-Channel-for-Fios-router-27831751 en Fri, 24 May 2013 06:26:17 EDT Fri, 24 May 2013 06:26:17 EDT http://www.dslreports.com/forum/Re-Best-Frequency-Channel-for-Fios-router-27832151
In my specific case, the least used channel was not the best by far. I told the router to use a specific channel and then set it to "automatic". This in turn did produce the best results.

I run speed tests and tested latency/packet loss on each channel as well to help with the findings.]]> http://www.dslreports.com/forum/Re-Best-Frequency-Channel-for-Fios-router-27832151 Mon, 17 Dec 2012 15:24:07 EDT http://www.dslreports.com/forum/Re-Best-Frequency-Channel-for-Fios-router-27831916 http://www.dslreports.com/forum/Re-Best-Frequency-Channel-for-Fios-router-27831916 Mon, 17 Dec 2012 14:39:39 EDT http://www.dslreports.com/forum/Re-Best-Frequency-Channel-for-Fios-router-27831903
Experiment until you find the one that works best. If they are all the same it doesn't really matter.

1, 6 and 11 are the ones I would try first.

Try one run a few speedtests and see what you get. Then try the other and run some speedtest and then try the last one and again run some speedtest. ]]> http://www.dslreports.com/forum/Re-Best-Frequency-Channel-for-Fios-router-27831903 Mon, 17 Dec 2012 14:37:36 EDT http://www.dslreports.com/forum/Best-Frequency-Channel-for-Fios-router-27831751 http://www.dslreports.com/forum/Best-Frequency-Channel-for-Fios-router-27831751 Mon, 17 Dec 2012 14:03:56 EDT