dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
2
share rss forum feed


aefstoggaflm
Open Source Fan
Premium
join:2002-03-04
Bethlehem, PA
kudos:7
Reviews:
·PenTeleData
·Verizon Online DSL
reply to Valdo

Re: [speed/latency] Verizon Speed Slow at times

Since your modem is in bridge-bridge mode as recommend at »Verizon Online DSL FAQ »How do I use a router with the Westell 6100? and you have your own RJ-45 WAN port router, then I have to ask the following questions.

Based upon the answers to my questions, I can tell you what options you have based upon the equipment that you have.

Please answer as many of these questions, as you can.

#1 What is the brand and model of the RJ-45 WAN port router?

For example Linksys E4200 version 1

#2 What is the current LAN IP of your RJ-45 WAN port router?

#3 Does that router have third party firmware on it and if so which one?

Three examples come to mind Tomato, OpenWRT, and DD-WRT.

#4 Most likely your RJ-45 WAN port router has a built in switch in it. Do you have a hub/switch that is not part of a NAT router?

For example the Dynex DX-EHB4 version 3.0.

#5 Do you have any of your computer(s) that has at least two NICs and if so, is one of the NICs of the computer is a wired NIC?

If you have at least two computers that have at least two NICs, but only one of the computers has a wired NIC say yes.

#6 Do you know how to setup a Static IP on your computer?

#7 Before putting this modem combo into bridge mode, you did not change the LAN IP of it?
--
Please use the "yellow (IM) envelope" to contact me and please leave the URL intact.



Valdo

@verizon.net

#1 What is the brand and model of the RJ-45 WAN port router?

For example Linksys E4200 version 1

My router is a Belkin F7D1301 Version 1.

#2 What is the current LAN IP of your RJ-45 WAN port router?

Is this the default IP Address in which you can access all the settings and features of the router. If so, then its 192.168.2.1

#3 Does that router have third party firmware on it and if so which one?

Three examples come to mind Tomato, OpenWRT, and DD-WRT.

No it doesn't, it is currently running on the latest firmware the official company that is providing.

#4 Most likely your RJ-45 WAN port router has a built in switch in it. Do you have a hub/switch that is not part of a NAT router?

For example the Dynex DX-EHB4 version 3.0.

No I believe I don't have that. I just have two devices, the modem that Verizon provided and the Belkin F7D1301 Version 1 Router that handles all the Firewall and NAT settings.

#5 Do you have any of your computer(s) that has at least two NICs and if so, is one of the NICs of the computer is a wired NIC?

If you have at least two computers that have at least two NICs, but only one of the computers has a wired NIC say yes.

Umm, Hopefully I understood you correctly. Based from my understanding, each computer that I owned, your asking if each one of them have at least two NIC's. If so, then No. I only have one computer wired which only has one NIC and its connected to the router, which the router is connected to the modem. I have one computer and two laptops. The two laptops have two NIC's in each of them and are connected wirelessly.

Before putting this modem combo into bridge mode, you did not change the LAN IP of it?

No, I did not change the LAN IP if you mean the Private one which is 192.168.1.1.




I did my best to answer all your questions based on my knowledge and from my understanding. Hopefully I did a good job on it.