reply to xboxuser
Re: Need help for setting QOS with DD-Wrt! That's it.
Please start with these settings:
Click on the NAT/QoS tab -> QoS tab
Start QoS: Enable
Packet Scheduler: HTB (bug with HFSC in pre 14390 firmware)
Optimize for Gaming: unchecked
To the right of the "Add" button, select "sip", then click the "Add" button.
Change the sip priority to "Express" (If you add XBox Live at a later time, you may want to consider increasing the sip priority).
Default Bandwidth Limit
Click the "Save" button, then the "Apply Settings" button.
Power cycle the router.
Thanks for your help! I just make the setting, and sound good!!
Also, maybe you can give me any clue about it .... I also have a unit working on my lan, and want to give it a 512k up & down also ... whats I should do??
FastAtLast300 baud and beyond
reply to SCADAGeo
Shouldn't the RTP service also be included in the QOS settings? That's the service that carries the audio data. The SIP service is only used for signaling.