dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
3
share rss forum feed

Goliath13

join:2009-07-10
reply to grand total

Re: Alternative to voip.ms ?

Thanks for the reply.
When you say "users" does that mean sub-accounts or channels under each DID? I would need to eventually port 3 DIDs. Would that mean that I would need to have 3 different users?
CallCentric provides 3 channels per DID but they can't be used with a different device I guess or at least they didn't recommend that.
I'm just trying to figure out how it would work with Anveo as it seems like the most probable option at this point.


grand total

join:2005-10-26
Mississauga
kudos:2
Reviews:
·Anveo
·VMedia

said by Goliath13:

Thanks for the reply.
When you say "users" does that mean sub-accounts or channels under each DID? I would need to eventually port 3 DIDs. Would that mean that I would need to have 3 different users?
CallCentric provides 3 channels per DID but they can't be used with a different device I guess or at least they didn't recommend that.
I'm just trying to figure out how it would work with Anveo as it seems like the most probable option at this point.

Users are sub-accounts in VoIP.MS speak. You need as many users as you have telephone instruments. You can have any or all DIDs ring any or all telephones.
--
DPC3825 (bridged mode) - WRT610N + Tomato - Panasonic KX-TGP500 - Asterisk 11.0.2 on Virtual Server
Anveo - FreePhoneLine - Voxbeam - Numbergroup - Callcentric - VoIP.MS - Localphone - UKDDI

Goliath13

join:2009-07-10

So, if I have 3 telephones with 3 DIDs, I would need 3 users which would necessitate getting the additional $5 upgrade of 6.55 plan?
Does the plan encompass all DIDs though or is it just for a single DID? If I had to get a 6.55 plan for each DID I guess it wouldn't be worth it.
Ordering the pay as you go plan is I think $1.95 per DID a month with Anveo right? Plus a certain per minute rate plan.

I'm just trying to get a handle on what the final total is going to be.
Forgot to mention that one DID is a toll free number.

I'm going to be using CallWithUs for the outgoing calls from now on though. I've never had any issue at all with them over years of using them.


grand total

join:2005-10-26
Mississauga
kudos:2
Reviews:
·Anveo
·VMedia

said by Goliath13:

So, if I have 3 telephones with 3 DIDs, I would need 3 users which would necessitate getting the additional $5 upgrade of 6.55 plan?
Does the plan encompass all DIDs though or is it just for a single DID? If I had to get a 6.55 plan for each DID I guess it wouldn't be worth it.
Ordering the pay as you go plan is I think $1.95 per DID a month with Anveo right? Plus a certain per minute rate plan.

I'm just trying to get a handle on what the final total is going to be.
Forgot to mention that one DID is a toll free number.

I'm going to be using CallWithUs for the outgoing calls from now on though. I've never had any issue at all with them over years of using them.

3 telephones = 3 users, so 'free' plan + $5 upgrade or $6.55 plan. Either way it covers all 3 numbers. You should check that Anveo can port all your numbers.

Incoming unlimited DIDs are $2 per month, toll-free is $1.49 per month plus 1.9 cents per minute.

How will you use CWU for outgoing? Do you have some sort of PBX? In that case maybe you wouldn't need a third user.
--
DPC3825 (bridged mode) - WRT610N + Tomato - Panasonic KX-TGP500 - Asterisk 11.0.2 on Virtual Server
Anveo - FreePhoneLine - Voxbeam - Numbergroup - Callcentric - VoIP.MS - Localphone - UKDDI

Stewart

join:2005-07-13
kudos:24
reply to Goliath13

said by Goliath13:

So, if I have 3 telephones with 3 DIDs, I would need 3 users ...

Not necessarily. "Users" correspond (roughly) to SIP registrations. If you have three stand-alone IP desk phones, without a PBX or other consolidation hardware at your end, you would need three users, even if you have only one DID. However, if you have e.g. a Gigaset or Panasonic cordless IP phone system, you could have DID A ring handset A, DID B ring handset B, etc., with only one user. You could do the same thing with two OBi202s, though I'd recommend one user per ATA, so a failure of one device won't affect the other(s).

If you have two or more DIDs, e.g. one toll-free and one local, with incoming calls routed in the same phone(s), the extra DIDs would not require additional users.

What VoIP hardware do you have? What behavior do you want when each of your DIDs are called?

Goliath13

join:2009-07-10

We have 3 Polycom VVX 500s and 1 Polycom VVX 600.

We're sharing 3 DIDs between the 4 phones.

Two lines are shared between 3 phones. 1 Did is for a standalone phone and isn't shared.

I don't have a PBX setup and Polycom unfortunately doesn't have a line-seize setting to allow it to choose Line * on handset or speaker phone pickup. What I've done is make the CallWithUs line the top most line. It's a crude solution but it does the job. Whenever the handset or speakerphone is picked up it goes to line 1.

I'd like all 3 phones to ring whenever a call is made to the 2 Dids. Whoever picks up would answer and if need be can transfer the call between the other phones.

Voip.ms' sub-accounts feature got the job done really nicely but their reliability is a different story.


SCADAGeo

join:2012-11-08
N California
kudos:2

1 recommendation

said by Goliath13:

Voip.ms' sub-accounts feature got the job done really nicely but their reliability is a different story.

Voip.ms had a rough month.

MartinM mentioned that the new Toronto location is coming online in January, and it's supposed to have more capacity, too.

PX Eliezer7
Premium
join:2008-08-09
Hutt River
kudos:13
Reviews:
·callwithus
·voip.ms

This has been a tough year all around, and I don't just mean VoIP.

I look forward to 2013 and hope that it will be good for all of us.

¡Feliz Año Nuevo!


JJ_GTA
Premium
join:2009-04-01
Ontario
Reviews:
·voip.ms
·Anveo
·TekSavvy Cable
reply to Stewart

said by Stewart:

Panasonic cordless IP phone system, you could have DID A ring handset A, DID B ring handset B, etc., with only one user.

How do you have multiple DIDs ringing different handsets with only one user/subaccount? I have setup separate users/subaccounts to handle the DIDs ringing to different stations.

I am happy with VoIP.ms and Anveo. They work differently but both have the pros/cons just like any provider.


Arne Bolen
Happy Anveo customer
Premium
join:2009-06-21
Cyberspace
kudos:4
Reviews:
·Anveo
·voip.ms
·callwithus
·Callcentric
reply to PX Eliezer7

said by PX Eliezer7:

I look forward to 2013 and hope that it will be good for all of us.

(20)13 = The Lucky Number.
--
My VoIP News


VexorgTR

join:2012-08-27
Sheffield Lake, OH
kudos:1
Reviews:
·voip.ms
·Callcentric
·callwithus

My opinion on a voip provider will depend on your usage (in minutes) and reliability needs. If your DID's are for a business that gets TONS of calls, I have one idea... if its for a home office that gets moderate calls, it's another thing.

Please add that detail.