dslreports logo
 
    All Forums Hot Topics Gallery
spc
uniqs
8

FizzyMyNizzy
join:2004-05-29
New York, NY

1 edit

FizzyMyNizzy to miakica

Member

to miakica

Re: [motherboard] Installation problems

Is the system ram 1600? or 1333? and using xmp? shrug

For windows and video card. Did you change the power saving settings? I know Nvidia Control Panel has one.

For the bios, Primary Display. Is it set to PEG? Have you disable iGPU? On the NB PCIe Configuration, set it to Gen3 for both.

For the Mainboard, You did plug the video card close slot to the CPU right? PCIe x16_1 slot?

Also for the mainboard, you did use the ESP12v 4pin? Instead of just 2pin. Upper left corner of the mainboard.

Ghastlyone
Premium Member
join:2009-01-07
Nashville, TN

Ghastlyone

Premium Member

said by FizzyMyNizzy:

Is the system ram 1600? or 1333? and using xmp? shrug

I'd check this also.

On my first boot up with my Z77 board, the MB defaulted the RAM to 1333. I had t manually set it to 1600.

FizzyMyNizzy
join:2004-05-29
New York, NY

1 edit

FizzyMyNizzy

Member

Once you done with that list.

Download CPUz and GPUz, and start taking picture.

Oh, for the cpu.. is it default setting? Disable Speedstep.