dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
18
share rss forum feed

bbear2
Premium
join:2003-10-06
94045
kudos:5
Reviews:
·VOIPO
reply to scottb908

Re: connection issues

I'm not a tech expert on this but from experience, 6db is minimal to even get a sync. 7-9 is borderline to hold sync. 10 is fair, and anything above that should not be a concern. I would not accept anything less than 10 from my ISP. This also has to be consider in context with other things such as attenuation, etc.

If I recall from your logs you had a -2.0 show up at least once, which I don't understand.

scottb908

join:2002-07-23
Terryville, CT
well i replaced the wire from the jack to the modem with heavy gauge wire. levels came up quite a bit, ill have to watch it now to see if the error count continues.

2013/01/04 13:00:49 PST 1 6016 8128 8128 8128 15.9 16.0 29.3 16.8 0 0 0.00 0.25 768 1076 18.0 8.5 12.3 0 0

bbear2
Premium
join:2003-10-06
94045
kudos:5
Yes! Those 15.9 16.0 numbers look very respectable now. I'm not sure it was the heavy gauge wire itself, but rather 'clean' copper. I'm sure you will be happy with the difference. Everything else looks very good. Well done.

bbear2
Premium
join:2003-10-06
94045
kudos:5
reply to scottb908
Did you also notice your max. rate came up to 8128 solid across the board? Those are respectable numbers.