Re: Anyone having problems in the Riverside County area?
I ran the verizon speed test again... didn't change anything on the computer:
SendBufferSize set to  running 10s outbound test (client to server) . . . . . 32.44Mb/s running 10s inbound test (server to client) . . . . . . 57.97Mb/s
------ Client System Details ------ OS data: Name = Windows 8, Architecture = x86, Version = 6.2 Java data: Vendor = Oracle Corporation, Version = 1.7.0_09
------ Web100 Detailed Analysis ------ Client Receive Window detected at 281600 bytes. 45 Mbps T3/DS3 link found. Link set to Half Duplex mode Information: throughput is limited by other network traffic. Good network cable(s) found Normal duplex operation found.
Web100 reports the Round trip time = 12.25 msec; the Packet size = 1460 Bytes; and There were 307 packets retransmitted, 2727 duplicate acks received, and 3035 SACK blocks received The connection stalled 1 times due to packet loss The connection was idle 0.21 seconds (2.09%) of the time This connection is receiver limited 5.17% of the time. This connection is sender limited 76.47% of the time. This connection is network limited 18.36% of the time.
Web100 reports TCP negotiated the optional Performance Settings to: RFC 2018 Selective Acknowledgment: ON RFC 896 Nagle Algorithm: ON RFC 3168 Explicit Congestion Notification: OFF RFC 1323 Time Stamping: OFF RFC 1323 Window Scaling: ON Packet size is preserved End-to-End Server IP addresses are preserved End-to-End Information: Network Address Translation (NAT) box is modifying the Client's IP address