http://www.dslreports.com/forum/Putting-server-in-DMZ-AND-local-network-27890105 en Tue, 18 Jun 2013 17:18:18 EDT Tue, 18 Jun 2013 17:18:18 EDT http://www.dslreports.com/forum/Re-Putting-server-in-DMZ-AND-local-network-27903450
I tried forwarding FTP (ports 20 and 21) to my server but it didn't work besides connecting to localhost from the server itself. If you have any advice on making that work, I'd appreciate it.

Frontier is supposed to be installing a second wire pair from the CO to my house so I can run the 12/2 package, so for normal light use, 2mbit should be enough to run FTP for just me.
--
CompTIA Net+ Network Administrator - I know networks!
Professional Photographer - www.jnphoto.biz - Weddings and Senior Photos
Nice and comfy with Frontier DSL: I can help with your issues!
»speedtest.net/result/2387637868.png]]> http://www.dslreports.com/forum/Re-Putting-server-in-DMZ-AND-local-network-27903450 Fri, 11 Jan 2013 17:20:20 EDT http://www.dslreports.com/forum/Re-Putting-server-in-DMZ-AND-local-network-27897590 1.5MB) Off of the home server.]]> http://www.dslreports.com/forum/Re-Putting-server-in-DMZ-AND-local-network-27897590 Thu, 10 Jan 2013 01:01:04 EDT http://www.dslreports.com/forum/Re-Putting-server-in-DMZ-AND-local-network-27897536
Not mentioning frontier can turn off your Internet if they found out]]> http://www.dslreports.com/forum/Re-Putting-server-in-DMZ-AND-local-network-27897536 Thu, 10 Jan 2013 00:20:48 EDT http://www.dslreports.com/forum/Re-Putting-server-in-DMZ-AND-local-network-27897431
Not mentioning frontier can turn off your Internet if they found out]]> http://www.dslreports.com/forum/Re-Putting-server-in-DMZ-AND-local-network-27897431 Wed, 09 Jan 2013 23:35:38 EDT http://www.dslreports.com/forum/Re-Putting-server-in-DMZ-AND-local-network-27897378 http://www.dslreports.com/forum/Re-Putting-server-in-DMZ-AND-local-network-27897378 Wed, 09 Jan 2013 23:11:34 EDT http://www.dslreports.com/forum/Re-Putting-server-in-DMZ-AND-local-network-27894567
You first need to setup the modem to provide a dmz to one of the switch ports.

Next your would connect one of the spare nic in the server to the the dmz.

MAKE SURE THE DMZ NIC IS PROPERLY FIREWALLED!
Be sure only those services that should respond to requests from the dmz will respond everything else should be ignored.

You would then need to double check your ip tables (route table) are going in the right directions. The servers primary links should be through the normal path with only replies to external requests going through the dmz.

I have done this in the past by adjusting the table to show the connection through the dmz is the longer path.

I typically use GRC's sheilds up tool for my initial confirmation that things are configured right. Do a FULL scan!

The above is basically the limits of my knowledge in this field. If you need more info you should google it or find a server specific forum.]]> http://www.dslreports.com/forum/Re-Putting-server-in-DMZ-AND-local-network-27894567 Wed, 09 Jan 2013 09:50:11 EDT http://www.dslreports.com/forum/Putting-server-in-DMZ-AND-local-network-27890105
I have DSL through a Netgear 7550 connected to a Cisco 48 port switch. The rest of the network runs off this switch.

The server has 4 network cards and I have lots of switches and routers, so hardware isn't a problem. I'm just not sure how to go about setting this up. I'm willing to work with virtual machines if necessary.

If anyone has experience using a single server (or VMs) on both a local network and DMZ network, help me figure this out. I'm really unsure of what to do here.
--
CompTIA Net+ Network Administrator - I know networks!
Professional Photographer - www.jnphoto.biz - Weddings and Senior Photos
Nice and comfy with Frontier DSL: I can help with your issues!
»speedtest.net/result/2387637868.png]]> http://www.dslreports.com/forum/Putting-server-in-DMZ-AND-local-network-27890105 Mon, 07 Jan 2013 22:24:55 EDT