|reply to jamesonnorth |
Re: Putting server in DMZ AND local network
Speaking in general terms...
You first need to setup the modem to provide a dmz to one of the switch ports.
Next your would connect one of the spare nic in the server to the the dmz.
MAKE SURE THE DMZ NIC IS PROPERLY FIREWALLED!
Be sure only those services that should respond to requests from the dmz will respond everything else should be ignored.
You would then need to double check your ip tables (route table) are going in the right directions. The servers primary links should be through the normal path with only replies to external requests going through the dmz.
I have done this in the past by adjusting the table to show the connection through the dmz is the longer path.
I typically use GRC's sheilds up tool for my initial confirmation that things are configured right. Do a FULL scan!
The above is basically the limits of my knowledge in this field. If you need more info you should google it or find a server specific forum.