Topic 'Sharing Bell Accounts' in forum 'Bell Canada' - dslreports.com

Re: Sharing Bell Accounts

Sat, 19 Jan 2013 13:07:18 EDT

joeblow3 posted : DPP ... dish pro hardware. Just allows you to bring one coax to the receiver then it is split with a dish pro splitter to two into the dual tuner receiver

Re: Sharing Bell Accounts

Sat, 19 Jan 2013 10:51:38 EDT

phil615 posted : The issue might be how the dishes are set up. Before, Bell used to utilize the sw44 switch and now they use another method. The older method required two cables to be connected to the receiver, whereas the newer method only requires one cable to be connected. My guess is that you're set up the new way and your parents are set up the old way, which is why you are having this problem.

I'm not well versed in Bell's systems so I may be somewhat wrong or another thing is causing this issue.

Re: Sharing Bell Accounts

Thu, 17 Jan 2013 07:04:06 EDT

HeadSpinning posted : You of course realize that this "sharing" is against the terms of service... Just sayin'....
--
MNSi Internet - »www.mnsi.net

Re: Sharing Bell Accounts

Wed, 16 Jan 2013 18:55:04 EDT

xsbell posted :

said by JkRumb :

Has anyone had an issue where you had a couple of receivers installed at one house. Then moved one to a friends house where they use to have bell expressvu but you could not get all the channels.

My parents are cancelling their account and we are replacing their HD PVR with one from our account. In theory this swap out should be work fine. But the new reciever doesn't get all the channels, only their house. While it works fine at ours. They still have their old one and it still works at their house, so it doesn't seem like a signal problem. Are these recievers some how tied to the dish itself now? I know we've done this in the past with other recievers with no problem.

They're both HDPVR 6400 models.

I'm guessing your friend only has one lnb on his dish whereas at your house you have two, one for 91, the other for 82.

If that's not it, it could be a misaligned dish causing them not to get all of the transponders, a faulty switch, or cabling.

Sharing Bell Accounts

Wed, 16 Jan 2013 18:17:39 EDT

anon posted : Has anyone had an issue where you had a couple of receivers installed at one house. Then moved one to a friends house where they use to have bell expressvu but you could not get all the channels.

My parents are cancelling their account and we are replacing their HD PVR with one from our account. In theory this swap out should be work fine. But the new reciever doesn't get all the channels, only their house. While it works fine at ours. They still have their old one and it still works at their house, so it doesn't seem like a signal problem. Are these recievers some how tied to the dish itself now? I know we've done this in the past with other recievers with no problem.

They're both HDPVR 6400 models.