| MLPPP problem with the modem Sagemcom 2864
Hello,
I just got the new service set up, its is HIGH SPEED DSL 25, Dry Loop. I add the service of MLPPP on it.
Currently I have the modem Sagemcom 2864, which can also function as a router. And I bought a router WRT54GL for the MLPPP purpose. This router is already upgraded to Tomato/MLPPP Version 1.27.
Problem:
As far as I know, to use MLPPP, the router should be operating in PPPoE mode. However, I can connect to the internet through the router WRT54GL in WAN type DHCP, but it is not working when I use PPPoE in this router.
What can I do to enable the MLPPP function?
Thank you! |
|
 TSI MartinPremium
join:2006-02-23
Chatham, ON
kudos:23 | You didn't put the login in the Sagemcom did you?
Make sure the MLPPP check is on for MLPPP?
Even if it's off, you should still be able to establish a PPPoE connection. |
|
| I did put the login in the Sagemcom.
But I don't know how to establish a PPPoe connection and MLPPP on the router WRT54GL. |
|
| The modem has to be in bridge mode. Enter your pppoe information in the router at Basic>Network.
--
db |
|
| I can't find the setting of bridge mode on this modem. What am I suppose to do? |
|
Reviews:
 ·voip.ms
·link2voip
| I'm not at all familiar with that modem. Hopefully somebody else can help with that, or maybe you can find help in the documentation or on the web.
Short of that, buying a good consumer-friendly modem might be the peace-of-mind option for the long term.
--
db |
|
keltron
join:2012-12-26
North York, ON | Login to Sagemcom modem and reset Factory Settings.
Reboot Modem
Put PPPOE credentials in router
Connect ethernet from WAN1 router to LAN1 modem
should do the trick |
|
TSI MartinPremium
join:2006-02-23
Chatham, ON
kudos:23 | reply to wuyucong1990
+1 |
|
1 edit | reply to clarknova
Thank you all the same.
Unfortunately this modem is rented from the company Teksavvy. |
|
Reviews:
 ·TekSavvy DSL
| reply to wuyucong1990
do not use mlppp with a 25mbit and WRT54GL.
It's not fast enough, you will only get 19mbits/s maximum and possibly have other problems.
You don't need mlppp, bell should have stopped throttling by now.
Install tomatousb on your wrt54gl. |
|
kovy
join:2009-03-26
kudos:8 | reply to wuyucong1990
Do you really need MLPPP ? |
|
| don't I? I am not familiar with these things. |
|
| reply to Cloneman
thank you.
Do they really stop throttling? I don't know about this. |
|
kovy
join:2009-03-26
kudos:8 | reply to wuyucong1990
Yeah it's stopped a while ago. |
|
