dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
14
share rss forum feed


Inssomniak
The Glitch
Premium
join:2005-04-06
Cayuga, ON
kudos:2
reply to unwired9

Re: OSPF Backhauls

When you have an answer, I need it too.

They dont officially support OSPF, so if I need to, I continue at the commandline from some other router in the same subnet if it just so happens the link towards the gateway is out. Which end is the gateway? I always make it the end closest to the core router where my attack angle usually is coming from.

NAT is another option, but messy.
--
OptionsDSL Wireless Internet
»www.optionsdsl.ca



warwick

join:2009-06-05
Hollywood, FL

Hmm, if I may - what exactly is being asked?



Inssomniak
The Glitch
Premium
join:2005-04-06
Cayuga, ON
kudos:2

I think he is asking about the ubnt bridges between mikrotik routers and OSPF if a link goes down, and the ubnt loses its ability to communicate with its default gateway you can't access them out of their subnet after OSPF re routes around the problem.
--
OptionsDSL Wireless Internet
»www.optionsdsl.ca



TomS_
Git-r-done
Premium,MVM
join:2002-07-19
London, UK
kudos:5

We used to do radio management like the following diagram.

Blue is a VLAN which we are using to route between the two POPs, and red is a VLAN used for device management at the POP on the left.




If the router at the remote side had issues, you were at least able to confirm it was the router, and not the link in the middle.

We would run OSPF over the blue VLAN, but red was basically an access VLAN solely for management devices.