dslreports logo
 
    All Forums Hot Topics Gallery
spc
uniqs
32
H_T_R_N (banned)
join:2011-12-06
Valencia, PA

H_T_R_N (banned) to XCOM

Member

to XCOM

Re: Project: New office build out.

No outlets on the new wall at all, or are they coming?

XCOM
digitalnUll
Premium Member
join:2002-06-10
Spring, TX
(Software) pfSense
MikroTik CRS125-24G-1S-RM

XCOM

Premium Member

said by H_T_R_N:

No outlets on the new wall at all, or are they coming?

The systems will not be on the new wall so no outlets need it there. There is plenty of electrical outlets on the existing walls so we are good there. Is going to be too much work to run Cat6 to the wall where the systems are going to be so the idea is to run 100 cat6 cables behind the base board to the systems area.
Is hard to picture it right now but let me see if I can come up with a diagram so I can explain it better.

(Yes 100 is a joke... Is going to be 4 runs only )

Thane_Bitter
Inquire within
Premium Member
join:2005-01-20

Thane_Bitter

Premium Member

Err, not to be a PITA but "you never can have too many outlets", and the NEC has rules.

Anyways Wire Mould(TM) makes solutions which would allow you to have power on that wall, be code compliant and be completely removable when/if the wall ever comes out.

Anyways its coming along very fast, you might get it done in a week!

XCOM
digitalnUll
Premium Member
join:2002-06-10
Spring, TX
(Software) pfSense
MikroTik CRS125-24G-1S-RM

XCOM

Premium Member

said by Thane_Bitter:

Err, not to be a PITA but "you never can have too many outlets", and the NEC has rules.

Anyways Wire Mould(TM) makes solutions which would allow you to have power on that wall, be code compliant and be completely removable when/if the wall ever comes out.

Anyways its coming along very fast, you might get it done in a week!

Mehhh.... True. I guess I can deal with it for now
I am hoping that is all done this week end..