http://www.dslreports.com/forum/58Ghz-2-dishpolarity-27932491 en Wed, 19 Jun 2013 16:25:06 EDT Wed, 19 Jun 2013 16:25:06 EDT http://www.dslreports.com/forum/Re-58Ghz-2-dishpolarity-28023263 --
»www.wirelessdatanet.net]]> http://www.dslreports.com/forum/Re-58Ghz-2-dishpolarity-28023263 Mon, 18 Feb 2013 18:42:35 EDT http://www.dslreports.com/forum/Re-58Ghz-2-dishpolarity-28023157 http://www.dslreports.com/forum/Re-58Ghz-2-dishpolarity-28023157 Mon, 18 Feb 2013 18:04:11 EDT http://www.dslreports.com/forum/Re-58Ghz-2-dishpolarity-28022297 http://www.dslreports.com/forum/Re-58Ghz-2-dishpolarity-28022297 Mon, 18 Feb 2013 13:27:38 EDT http://www.dslreports.com/forum/Re-58Ghz-2-dishpolarity-27941924
Otherwise you would have a dual polarity feed horn. Which you would go off of the location of the N connectors for your polarity.

There were also wideband single polarity feed horns. In that case as well you would mount the feedhorn and use the n connector as your reference point for polarity.

You mention screw holes, which leads me to believe you have one of the two later horns I mentioned. The first mentioned uses a jam nut on the back of the feedhorn/dish. You would loosen the nut and remove the feed horn to reposition polarity according to the previously mentioned post. But, the plate that the first feed horn uses is removed for the other two feedhorns mentioned.

Confused yet? LOL
--
»www.wirelessdatanet.net]]> http://www.dslreports.com/forum/Re-58Ghz-2-dishpolarity-27941924 Thu, 24 Jan 2013 01:09:14 EDT http://www.dslreports.com/forum/58Ghz-2-dishpolarity-27932491 http://www.dslreports.com/forum/58Ghz-2-dishpolarity-27932491 Mon, 21 Jan 2013 12:10:49 EDT