|
Re: [DNS] How do I setup DNS server in an Aris Dongle Gateway moApply the DNS via your computer...
Open Network Connections by clicking the Start button Picture of the Start button, and then clicking Control Panel. In the search box, type adapter, and then, under Network and Sharing Center, click View network connections.
Right-click the connection that you want to change, and then click Properties. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Click the Networking tab. Under This connection uses the following items, click either Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties. Picture of the Network Connection Properties dialog boxThe Network Connection Properties dialog box
To specify IPv4 IP address settings, do one of the following:
To get IP settings automatically using DHCP, click Obtain an IP address automatically, and then click OK.
To specify an IP address, click Use the following IP address, and then, in the IP address, Subnet mask, and Default gateway boxes, type the IP address settings.
To specify IPv6 IP address settings, do one of the following:
To get IP settings automatically using DHCP, click Obtain an IPv6 address automatically, and then click OK.
To specify an IP address, click Use the following IPv6 address, and then, in the IPv6 address, Subnet prefix length, and Default gateway boxes, type the IP address settings.
To specify DNS server address settings, do one of the following:
To get a DNS server address automatically using DHCP, click Obtain DNS server address automatically, and then click OK.
To specify a DNS server address, click Use the following DNS server addresses, and then, in the Preferred DNS server and Alternate DNS server boxes, type the addresses of the primary and secondary DNS servers. Picture of the Internet Protocol Version 4 (TCP/IPv4)Properties dialog boxThe Internet Protocol Version 4 (TCP/IPv4)Properties dialog box
To change advanced DNS, WINS, and IP settings, click Advanced. |
plencnerb Premium Member join:2000-09-25 53403-1242 1 edit |
to Comcastnet
Re: [DNS] How do I setup DNS server in an Aris Dongle Gateway moI think you may have mis-understood what has been said so far.... Let me break it down for you Kara's comment is below quote: don't bother call comcast support on this one that would be no way. And setup own server on home chsi acct is no no against tos. Read it.
Then, ropeguru said, in reply to Kara. By the way, the "He" that is mentioned is in reference to you! quote: He is trying to use OpenDNS' DNS servers instead of Comcast's.
In regards to your issue, if you could provide the information that NetFixer has asked for, someone will be able to help you set up OpenDNS on the "Aris Dongle Gateway modem". An exact Model # would help with that. It should be printed on the outside of the unit, either directly, or on some kind of sticker attached to it. --Brian |