http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27943318 en Thu, 23 May 2013 02:07:19 EDT Thu, 23 May 2013 02:07:19 EDT http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27948989
Subnet broadcasts to .255 might be a different kettle of fish.

kirby]]> http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27948989 Sat, 26 Jan 2013 09:33:39 EDT http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27948775 I will go with your suggestion, if I will need more support I will post again :)]]> http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27948775 Sat, 26 Jan 2013 06:30:07 EDT http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27948188 Start with user guide here »ftp://ftp.zyxel.com/ZYWALL_USG_100/use···_Ed1.pdf
When you run into specific questions don't hesitate to ask here.]]> http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27948188 Fri, 25 Jan 2013 21:30:17 EDT http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27948180 NETBIOS Routable?]]> http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27948180 Fri, 25 Jan 2013 21:27:12 EDT http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27946338
Can one route NetBios etc. across subnet boundaries with a policy route?

On my Cisco switch (yes, I call my USG 50 Pancho) VLANs can be setup so that particular ports are members of more than one VLAN (not sure if this only works for members of default VLAN 1 at the moment) and in such a case, the NetBios traffic seems to be common because some PCs can find the printers.

kirby]]> http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27946338 Fri, 25 Jan 2013 11:35:48 EDT http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27945480 yes for "see" I was intending that I can ping them, ftp and web connect on server using the IP so I think that some service for autodiscovery are not passing to Lan2 .
I will try your binding suggestion , Kirby, adding fixed IP for printer and server.
Brano, sorry but as now I don't have any , except the one the USG 100 create when it was installed.
Before we only had 1 WAN and we use only LAN1 so no specifc set up was put in place, all came in november when we got the second Wan and we start to see how we can separate the traffic on both lan, a sort of load balancing, we started Lan2 to be used for cellphone/private tablet and it was ok as they don't need to see any internal resource. Now we are try to squeeze the most of the 2 WAN .
Any furter suggestion will be helpfull ;)]]> http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27945480 Fri, 25 Jan 2013 04:59:49 EDT http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27944696 For testing disable and fix your Policy routing (if unsure post a screenshot here).]]> http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27944696 Thu, 24 Jan 2013 21:06:14 EDT http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27944407
If the firewall allows LAN 1 to LAN 2 and vice versa traffic, then one can ping each way and one can print, so long as the printer program on a LAN 2 PC knows the IP address of the printer on LAN 1.

If you want auto discovery of where printers are by, e.g., Windows, the messages that perform that function are not usually passed beyond the boundaries of a given subnet so you may be out of luck.

I have printers on a separate VLAN and allow them access to the VLAN the computers are on and vice versa at the USG firewall. I block them from access to the Internet. I use MAC binding to assure that printers obtain specific IP addresses, and then point PC printer setups to those IP addresses.

kirby]]> http://www.dslreports.com/forum/Re-lan2-dont-see-server-on-lan1-27944407 Thu, 24 Jan 2013 19:25:19 EDT http://www.dslreports.com/forum/lan2-dont-see-server-on-lan1-27943318 all the desktop/server/printers on Lan1 192.168.1.x
and
I will like to put all the
laptop/cellphone/tablet on wifi at Lan2 192.168.2.x
I already set the 2 lan according to the IP and mask is
255.255.255.0
Zone is set to allow intra-zone for both
all is working and I can ping server from Lan2.
Now I have 2 problems,
first I need to use the WAN2 interface for the Lan2 internet traffic so I will free some bandwith on Wan1
second how I can enable the Lan2 clients to see the server and printer on Lan1 ??
Thanks a lot
:)]]> http://www.dslreports.com/forum/lan2-dont-see-server-on-lan1-27943318 Thu, 24 Jan 2013 13:59:36 EDT