Topic 'Qualificatiojn' in forum 'AT&T U-verse' - dslreports.com

Re: Qualificatiojn

Mon, 28 Jan 2013 20:02:52 EDT

Paralel posted : Doesn't seem like it should be a problem.

Re: Qualificatiojn

Mon, 28 Jan 2013 15:51:37 EDT

anon posted : You should be fine as long as your in house wiring can handle it.

Re: Qualificatiojn

Mon, 28 Jan 2013 15:48:30 EDT

NormanS posted :

said by wizkid6:

Uverse just became available in my area. When I enter my address, it shows that I qualify for the 18mpbs service.

Do my line stats look good enough to achieve the 18/1 (16mpbs after overhead) speed?

U-verse HSI isn't on an ATM circuit, so there should be less overhead. If your modem will sync at 18,000, I believe you would be good for 17 Mbps (.96x).

I expect those stats would be good enough for the 18 Mbps tier. Here are my current stats for a CLEC ADSL2+ (Sonic.net "Fusion") service:

DSL Line        Line 1 (inner pair)                 Down            UpRate:           18191 kbs       892 kbsMax Rate:       19564 kbs       952 kbs Noise Margin:    5.7 dB          7.2 dB Attenuation:    25.5 dB         15.5 dB Output Power:    0.0 dBm        12.7 dBm Protocol:       G.DMT2+ Annex AChannel:        Interleaved

This service is ATM, so measured download is .85x, or ~15 Mbps.

--
Norman
~Oh Lord, why have you come
~To Konnyu, with the Lion and the Drum

Qualificatiojn

Mon, 28 Jan 2013 12:07:28 EDT

wizkid6 posted : Uverse just became available in my area. When I enter my address, it shows that I qualify for the 18mpbs service.

Do my line stats look good enough to achieve the 18/1 (16mpbs after overhead) speed?

Stats are:

Max:    Upstream rate = 1341 Kbps, Downstream rate = 21952 KbpsBearer: 0, Upstream rate = 509 Kbps, Downstream rate = 8128 Kbps                 Down            UpSNR (dB):        28.9            19.8Attn(dB):        20.0            10.7Pwr(dBm):        19.2           -14.8

Do they look good or are they marginal for said tier?