dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
6
share rss forum feed


Darknessfall
Premium
join:2012-08-17
kudos:5
Reviews:
·Comcast
·AT&T U-Verse
reply to Tech007

Re: U Verse Installation questions

Click for full size
Coax is working fine for us. They also reused older coax and didn't replace our somewhat old line coming to our home. Had service for 4 years.

Phil75070

join:2005-08-17
Mckinney, TX

I have had similar questions regarding installation before deciding to make the switch to Uverse. We have a 4-bedroom home with coax to each of the bedrooms, the study and the family room. The splitting from the main, incoming line from the cable provider to get signal to all of those rooms is all done outside! Is that going to be a problem?

I prefer that they be able to use coax as in all of the bedrooms the coax outlets and phone jacks are on opposite walls.


dave006

join:1999-12-26
Boca Raton, FL

No major issue. AT&T U-verse is designed to displace existing service. It can reuse Coax just fine. The installer will test your Coax to determine if it is in good condition. Your current Coax TV splitter can be replaced with a diplexer that looks almost exactly like a CATV signal splitter.

The signal routing process is a little different in that the U-verse VDSL signal runs from the outside NID location to the where your Gateway is installed and then the IPTV is backfed using the same Coax to the diplexer to then distribute the IPTV signal to your other rooms.

Often after checking the existing Coax the installer will only need to replace the existing Coax connectors with new compression fitttings at the connection points and at the existing wall jacks.

Dave


Craiger

join:2012-07-05
Chesterfield, MO

Dave does Uverse still have it so if the RG goes down everything goes down? Or has ATT changed that so you could still watch TV if the RG goes down? Thanks.



Darknessfall
Premium
join:2012-08-17
kudos:5
Reviews:
·Comcast
·AT&T U-Verse

said by Craiger:

Dave does Uverse still have it so if the RG goes down everything goes down? Or has ATT changed that so you could still watch TV if the RG goes down? Thanks.

Everything goes down when the RG loses a connection.


StillLearn
Premium
join:2002-03-21
Streamwood, IL
Reviews:
·AT&T Midwest

I suggest finding the IP address of your ATT gateway. You can find that in the
Settings>Broadband>Status. Look for the item called Default Gateway. Write down that IP address.

Then ping that over long periods. I suggest the standard version of Ping Plotter. It has a 30-day free trial. It will graph your connectivity vs time, and that can help describe what you are seeing. If there is a time pattern, you could spot that too.

There are other ping programs that you might like.


DarienRedSox

join:2013-02-10
Darien, CT
Reviews:
·AT&T U-Verse
reply to Craiger

Before we start talking about a RG do you know what kind of install you are having done? If you are a long distance from the cross box you may be getting an iNID and a different inside unit.

In this case the TV would be run with coax to the diplexer. Phone will also be tied in to this outside box.

Inside you will have you inside unit which the computers hook up to (this unit is ran over a single pair of phone cables to the outside unit) and a power supply with a backup battery run to the outside unit.