said by locked:
OK toro: assumed these flash addresses are ok for spa2102 and firmware 5-2-13, please let me know this way is the good one:
unsolder the chip
dump with an e²prom programmer device (ie backup ?)
fill addresses to FF
BTW: possible to do that without unsolder?
I don't think so.
If you want to confirm the addresses, try to contact meister_sd
, I believe he's using that procedure.--
Providers (through asterisk): voip.ms, freephoneline, smartcall.ro, ipcomms, callcentric. Hardware: Vonage VDV21, Moto VT2x42, Linksys SPA series, Grandstream HT series, Panasonic KX-TGP5x0