|reply to JimThePCGuy |
Re: USG50 Bandwidth guarantee/limiting
I found the SIP setting to be entirely ineffective; we still had QOS issues and I eventually had to abandon the SIP trunks for a PRI.
BranoI hate VogonsPremium,MVMReviews:
Well, there is more to it then just enabling the check box.
- the BWM is managed for egress traffic only
- you need to set proper egress speed for your WAN interface first in order for any BWM to be effective
See »Re: How do I limit bandwidth to a specific workstation?
Interesting. And disturbing. I actually called ZyXEL U.S. support about it and was told, very specifically, "Check the box. That's all there is to do and all you can do."
That said, I did set the inbound and outbound speeds as well. We really, really need to get to a point where we have across the board QoS for things, like SIP/VoIP, that need it.
BranoI hate VogonsPremium,MVM
Yes, checking the box and setting the WAN interface speeds should be enough for SIP only. For other services you need to do it manually as per my earlier example thread.