<?xml version="1.0" encoding="UTF-8"?>

<rss version="2.0" xmlns:blogChannel="http://backend.userland.com/blogChannelModule">

<channel>
<title>Topic &#x27;Netgear FVS124G&#x27; in forum &#x27;Virtual Private Networking&#x27; - dslreports.com</title>
<link>http://www.dslreports.com/forum/Netgear-FVS124G-27965315</link>
<description></description>
<language>en</language>
<pubDate>Wed, 19 Jun 2013 16:45:07 EDT</pubDate>
<lastBuildDate>Wed, 19 Jun 2013 16:45:07 EDT</lastBuildDate>

<item>
<title>Re: Netgear FVS124G</title>
<link>http://www.dslreports.com/forum/Re-Netgear-FVS124G-27987193</link>
<description><![CDATA[bdmhenderson posted : I eventually got the VPN going had to end up using Fully Qualified User Name before it would work.<br><br>I have also got a netgear FVS318 - however if use the same settings for this the VPN doesn't work, it shows connected on both ends however I can't ping machines across the VPN - any thoughts on this?<br><br>Seen a couple of posts elsewhere with the same problem however they never mentioned if the found a solution (The posts were a couple of years old!)]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-Netgear-FVS124G-27987193</guid>
<pubDate>Thu, 07 Feb 2013 04:45:23 EDT</pubDate>
</item>

<item>
<title>Re: Netgear FVS124G</title>
<link>http://www.dslreports.com/forum/Re-Netgear-FVS124G-27973770</link>
<description><![CDATA[HarryH3 posted : When setting up a pair of Watchguard boxes to do a site-to-site VPN, there is no "which dials which".  Each end is set to search out the other at a specific IP (or FQDN if you have dymanic IP's).  They find each other and connect just a few seconds after booting up.]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-Netgear-FVS124G-27973770</guid>
<pubDate>Sat, 02 Feb 2013 23:08:31 EDT</pubDate>
</item>

<item>
<title>Re: Netgear FVS124G</title>
<link>http://www.dslreports.com/forum/Re-Netgear-FVS124G-27969146</link>
<description><![CDATA[HELLFIRE posted : Second  broccoli <A HREF="/useremail/u/1507424"><IMG SRC="http://i.dslr.net/bb/profile.gif" ALT="See Profile" BORDER=0 WIDTH=16 HEIGHT=11></A>'s comments.  Took all of two seconds on a search engine for "FVS124G manual" to find<br>what you needed.  After that is your desire to learn and DIY,  bdmhenderson <A HREF="/useremail/u/1856060"><IMG SRC="http://i.dslr.net/bb/profile.gif" ALT="See Profile" BORDER=0 WIDTH=16 HEIGHT=11></A>.<br><br>Regards]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-Netgear-FVS124G-27969146</guid>
<pubDate>Fri, 01 Feb 2013 12:39:43 EDT</pubDate>
</item>

<item>
<title>Re: Netgear FVS124G</title>
<link>http://www.dslreports.com/forum/Re-Netgear-FVS124G-27968037</link>
<description><![CDATA[broccoli posted : Start by reading this: <a href="http://www.downloads.netgear.com/files/GDC/FVS124G/FVS124G_RM_30Mar05.pdf">FVS124G Reference Manual</a>.  I just did, and found out that the router has a fairly-straightforward wizard for setting up gateway-to-gateway VPN tunnels.  You just have to enter the remote WAN and LAN addresses, and the PSK.]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-Netgear-FVS124G-27968037</guid>
<pubDate>Fri, 01 Feb 2013 04:21:35 EDT</pubDate>
</item>

<item>
<title>Re: Netgear FVS124G</title>
<link>http://www.dslreports.com/forum/Re-Netgear-FVS124G-27968025</link>
<description><![CDATA[bdmhenderson posted : I've setup VPNs on Draytek routers, never on these netgear ones, it seems totally different.<br><br>How do you choose which dials which? How does the IP/FQDN identification work?<br><br>I've searched the internet but all I can find is demo's of setting up the netgear prosfae client doftware, I can't find any walkthroughs of a LAN to LAN VPN]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-Netgear-FVS124G-27968025</guid>
<pubDate>Fri, 01 Feb 2013 03:57:15 EDT</pubDate>
</item>

<item>
<title>Re: Netgear FVS124G</title>
<link>http://www.dslreports.com/forum/Re-Netgear-FVS124G-27966124</link>
<description><![CDATA[Anav posted : I would start by reading the user guide.<br>That is assuming after one has read about VPNs on the net - there are many good white papers and explanations via google.]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-Netgear-FVS124G-27966124</guid>
<pubDate>Thu, 31 Jan 2013 15:25:46 EDT</pubDate>
</item>

<item>
<title>Netgear FVS124G</title>
<link>http://www.dslreports.com/forum/Netgear-FVS124G-27965315</link>
<description><![CDATA[bdmhenderson posted : Hi,<br><br>Does anyone know how I would go about configuring a VPN between 2 of these routers?<br><br>Thanks in advance<br><br>Brian]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Netgear-FVS124G-27965315</guid>
<pubDate>Thu, 31 Jan 2013 12:33:10 EDT</pubDate>
</item>

</channel>
</rss>
