<?xml version="1.0" encoding="UTF-8"?>

<rss version="2.0" xmlns:blogChannel="http://backend.userland.com/blogChannelModule">

<channel>
<title>Topic &#x27;[AZ] Certain Channels Out&#x27; in forum &#x27;Cox HSI&#x27; - dslreports.com</title>
<link>http://www.dslreports.com/forum/AZ-Certain-Channels-Out-27970180</link>
<description></description>
<language>en</language>
<pubDate>Sat, 25 May 2013 04:34:10 EDT</pubDate>
<lastBuildDate>Sat, 25 May 2013 04:34:10 EDT</lastBuildDate>

<item>
<title>Re: [AZ] Certain Channels Out</title>
<link>http://www.dslreports.com/forum/Re-AZ-Certain-Channels-Out-27972738</link>
<description><![CDATA[peterman25 posted : Interestingly enough...all the channels came back around 8pm last night. I had my wife test that they were still out before I made the call to Cox and they were out. 10 minutes later she was going through them again and all was good. I am going to chalk it up to the recent internet changes causing my TV problems. Hopefully it is fixed for good.]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-AZ-Certain-Channels-Out-27972738</guid>
<pubDate>Sat, 02 Feb 2013 15:48:46 EDT</pubDate>
</item>

<item>
<title>Re: [AZ] Certain Channels Out</title>
<link>http://www.dslreports.com/forum/Re-AZ-Certain-Channels-Out-27970398</link>
<description><![CDATA[Optimus2357 posted : If you can, try to hook a small TV to the cable that comes in from the outside, bypassing everything else. If the problem is still there, time to call for a Tech. I doubt its any hardware issue. Sounds like a signal issue, but it would help to isolate it.]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-AZ-Certain-Channels-Out-27970398</guid>
<pubDate>Fri, 01 Feb 2013 18:16:32 EDT</pubDate>
</item>

<item>
<title>[AZ] Certain Channels Out</title>
<link>http://www.dslreports.com/forum/AZ-Certain-Channels-Out-27970180</link>
<description><![CDATA[peterman25 posted : I found this to be a little odd and thought I would ask to see if anybody else has experienced this issue...<br><br>I noticed last weekend that certain cable channels were out at my house. I could not tune 1006 through 1012 and then 1031 through 1033. I tried the standard def versions and they were spotty tuning in and out. Those are the only channels that acted that way that I have found. I did a box reset last night and now the only channels I get are 02 through 12. That's it. I have a cablecard in the other room. It is still working except for the HD channels above. They still don't work. I have a TV that is directly connected to cable from the wall (no box and doesn't use the cablecard) and it works fine - tunes the SD and HD channels that it is capable of tuning.<br><br>One thing I did notice on the cablecard is that the signal quality was about 10% worse than normal on all channels. Signal strength was fine.<br><br>Thoughts? Suggestions? Cable box gone bad? I do have a signal amplifier in the mix supplied by Cox. It has power. I have MoCA supplying internet throughout the house too. Everything was fine until about a week ago. Thanks.]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/AZ-Certain-Channels-Out-27970180</guid>
<pubDate>Fri, 01 Feb 2013 17:06:27 EDT</pubDate>
</item>

</channel>
</rss>
