|reply to delar |
Re: [TWC] I got 50/5 Wideband service, now getting 9/5 on RR Haw
I followed the instructions except the part of having the PC connecting directly to the modem. I ordered a longer LAN cable but it will not get here till next week, free shipping.
The only step I did miss was input the mac address of the Asus, the modem had the old Netgear router mac address. Something I forgot to do when I got the Asus.
I checked the Motorola modem, the WAN ip address is listed as (---,---,---,---) so I am pretty sure I am in bridge mode.
I am at a lost, I really don't understand how I am not getting more than 10/5 when Saturday I was getting 50/5. Until I get my LAN cable I want to make sure it's not my router that is causing all of the problems all of a sudden.
I want to make a note that under Advance settings on the Motorola everything is enabled except for UPnP Enable.
Anyways, that's it for tonight, if anyone has other ideas I can try them when I get home tomorrow. Thanks everyone who tried to help. When I get the LAN cable I will try the steps again that you linked to delar.
Small update, before I went to sleep last night I wanted to see what IP address my PC was connecting to. So I went to network settings, and I saw that my LAN speed connection via the gigabit LAN on the motherboard was running at 10Mbs!
So now I am work and looking at the LAN speed connection here on the 10/100 network card and it is running at 100Mbs!
So somehow, either something I installed over the weekend, or my OS went *boink* that my gigabit LAN went from 1000Mbs to 10Mbs. This is why I was getting downloads of 10 and less.
Luckily, I bought an Intel gigabit PCI-E network card because Windows 8 was giving me problems. When I get home I will disable the onboard LAN connection and use the Intel gigabit, assuming that it will show up as 1000Mbs and not continue with 10Mbs.
Make sure you NIC is set to something like "Auto Negotiate". The wording may be a little different per your OS/NIC. Basically you want to make sure it's not specifically set to 10Mpbs (either half or full duplex).
How to check:
1.) Right click My Computer and go to properties
2.) Click Device Manager
3.) Expand Network Adapters
4.) Right-click your NIC and select Properties
5.) Go to the Advanced tab and Speed and Duplex
If you make a change you *may* need to reboot your machine for the changes to take effect. If Speed and Duplex is set correctly it could be a few things:
1.) NIC is faulty
2.) The port on the router/switch you're using is faulty
3.) Your network cable is faulty
I well check the settings first before I disable the onboard NIC and replace it with the Intel NIC card (if necessary).
Final update. Good news!
Surprisingly, it was a faulty connection. I noticed that the Asus router light was blinking off and on. So I pulled the network cable out put it back in...the light turned off. I went to check on my PC, and noticed that the network cable did not "snap" into the ethernet port. So once I got it to snap. Everything is now working.
Just did a speed test and I am at 51/5!
Thanks everyone for helping me.