 VioletVenomLets go GatorsPremium
join:2002-01-02
Gainesville, FL | Super hydrophobic coating product Someone shared this video with me and thought I'd pass it along for general discussion here. The uses for this product seem unlimited and revolutionary, IF this product is for real (and not the next asbestos). One example that was brought up was for HVAC coils, the defrost cycle could be eliminated greatly increasing the unit's SEER. I was blown away by the potential applications.
»www.youtube.com/watch?v=IPM8OR6W6WE
said by »www.spillcontainment.com/everdry :
Ultra-Ever Dry is a superhydrophobic (water) and oleophobic (hydrocarbons) coating that will completely repel almost any liquid. Ultra-Ever Dry uses proprietary nanotechnology to coat an object and create a barrier of air on its surface. This barrier repels water, refined oil, wet concrete, and other liquids unlike any other coating. Ultra-Ever Dry has vastly improved adhesion and abrasion resistance, compared to previous technologies, allowing it to be used in applications where greater durability is required.
Disclaimer: I'm not affiliated with this product. Would be nice as I'd say someone is going to be raking in the bucks. |
|
garys_2kPremium
join:2004-05-07
Farmington, MI | If it uses a microscopic layer of air to prevent wetting, I'd think that eventually a water-based liquid would saturate that air and allow the liquid to penetrate. |
|
 SparkChaserPremium
join:2000-06-06
Downingtown, PA
kudos:3
 ·Verizon FiOS
| reply to VioletVenom
lots at the web site »www.spillcontainment.com/
and here »www.maxxsale.com/linked/ultra-ev···1-12.pdf
Hmmm!
14. What chemicals will the material not work with?
Answer: Certain solvents, alcohols and soap/detergents will cause the surface of the coating to “wet-out”. Once
these chemicals are removed, the superhydrophobicity will generally return.
--
--
--
"Facts do not cease to exist because they are ignored." - Aldous Huxley
|
|
robbinPremium,MVM
join:2000-09-21
Leander, TX
kudos:1 | reply to VioletVenom
Very impressive but quite expensive |
|
 UHFAll static, all day, ForeverPremium,MVM
join:2002-05-24 | reply to VioletVenom
Why isn't this stuff on eye glass lenses?!? And car windshields! |
|
|
|
VioletVenomLets go GatorsPremium
join:2002-01-02
Gainesville, FL | reply to robbin
I noticed that too, and it's a 2 coat application so you have to buy the base and top. We were toying around, hypothetically of course, in an engine application. Less friction, less heat would translate to better mpg and engine longevity. Or take the HVAC possibility, in certain applications it might pay for itself. Coating work gloves or boots, like in the video, would be rather silly. |
|
SparkChaserPremium
join:2000-06-06
Downingtown, PA
kudos:3 Reviews:
·Verizon FiOS
| reply to UHF
said by UHF:Why isn't this stuff on eye glass lenses?!? And car windshields!
per FAQ
The standard product is a translucent white. We do not have a transparent formula at this time. |
|
VioletVenomLets go GatorsPremium
join:2002-01-02
Gainesville, FL | reply to UHF
That was my first thought, RainX beware. They don't have a translucent application yet is the answer.
Edit- There you go, transparent would be the proper adjective. |
|
 cdruGo ColtsPremium,MVM
join:2003-05-14
Fort Wayne, IN
kudos:7 | reply to VioletVenom
said by VioletVenom:The uses for this product seem unlimited and revolutionary, IF this product is for real (and not the next asbestos). Hydrophobic coatings and substances aren't all that new. The hard part about them is to make them last long term without requiring additional coatings. The gloves in the video are an example where it looks cool at first, but use them for any length of time and the areas that do a lot of flexing (e.g. nuckles) or abrasions (e.g. palms) and the hydrophobicness wears off.
One example that was brought up was for HVAC coils, the defrost cycle could be eliminated greatly increasing the unit's SEER.
Currently the "best" coating seems to be epoxy coatings that can have some hydrophillic properties, but also is more resistant to chemical corrosion especially organic acids that can cause formicary
corrosion as well as environments that normally would eat away untreated coils, such as salty air around oceans.
|
|
VioletVenomLets go GatorsPremium
join:2002-01-02
Gainesville, FL | Believe me, I'm not rushing out to buy any. You also bring up many valid points. To play devil's advocate here though. Back to the coils. What if this product surpasses its predecessors. If it does such a good job repelling water that water won't have a chance to stick to the coils?
I hear you on the longevity issue as well. Believe they address that as well discussing abrasion vs the coating, interior vs exterior application, etc. |
|
cdruGo ColtsPremium,MVM
join:2003-05-14
Fort Wayne, IN
kudos:7 | said by VioletVenom:What if this product surpasses its predecessors. If it does such a good job repelling water that water won't have a chance to stick to the coils? Just because it's a hydrophobic surfaces doesn't mean it won't freeze. Ask anyone who lives in the north who uses Rain-X if they still have to scrape frost on their windows. If the coils are cold enough, there's a chance that the droplets will still freeze, regardless if they are "sticking" to the coils. And once that starts, the accumulated ice will just grow and grow. |
|
lutful... of ideasPremium
join:2005-06-16
Ottawa, ON Reviews:
 ·TekSavvy DSL
| reply to cdru
said by cdru:said by VioletVenom:The uses for this product seem unlimited and revolutionary, IF this product is for real (and not the next asbestos). Hydrophobic coatings and substances aren't all that new. The hard part about them is to make them last long term without requiring additional coatings. Hydrophobic coatings are often applied to antenna covers (radomes) to minimize snow/ice buildup. But that only works above -10C and eventually runs off and needs to be reapplied.
The only permanent solution is bonding a thick film with tiny hairs to the surface which mimic lotus leaf and other hydrophobic natural surfaces. They usually incorporate PFPE ( perflouropolyether ) or other Teflon like chemicals.  |
|
 SteveI know your IP addressConsultant
join:2001-03-10
Yorba Linda, CA
kudos:5 | reply to VioletVenom
Spray some of this on your baby's behind - no more diaper rash! |
|
 WarzauPremium
join:2000-10-26
Naperville, IL
kudos:1 | reply to VioletVenom
Pretty cool! Spray this on concrete to prevent freezing rain from sticking. |
|
 MemphisPCGuyTaking Care BusinessPremium
join:2004-05-09
Memphis, TN | reply to VioletVenom
Its gonna be awesome! when I spill a drink I can just scoop it back into my cup!
--
Onsite Computer Support in Memphis
»www.memphispcguy.com |
|
 jayelhamPremium
join:2002-02-24
East Lansing, MI
 ·Comcast
| reply to VioletVenom
said by VioletVenom:That was my first thought, RainX beware. They don't have a translucent application yet is the answer.
Edit- There you go, transparent would be the proper adjective.
Rain-X already has something to be worried about...Aquapel.
»www.autoblog.com/2006/04/17/rain···-match+/ |
|
| Aquapel on my windshield from last May is still holding its own. Not like it was at first application, but really, after 9 months...its got rain-x beat by 8 months!
I would like to see this on raingear, umbrellas, (if food safe...inside peanutbutter jars, syrups, honey...), paint containers, caulkguns, ... anything that has some kinda material that is resistant to removal-expulsion...
Might be good in automotive applications (doubtful of cylinders due to heat...but maybe oil pans or other liquid passages), outside of cars or underneath, wheel wells...
Tarps, roofing, gutters... lots of opportunities
I read once that certain nano-gear was banned from swimmers and competition. I think they had zero resistance in water...wonder how hulls could do with this (if it doesn't wear off)...
--
Splat |
|
garys_2kPremium
join:2004-05-07
Farmington, MI Reviews:
 ·callwithus
·Callcentric
| said by cableties:I would like to see this on ... anything that has some kinda material that is resistant to removal-expulsion...
Enemas? |
|
| reply to VioletVenom
yeah, not really new or unique/special/rare.
there were maybe.....4? 5? 6? different companies at CES this year (2013) selling hydrophobic coating solutions.
They predominately target the consumer electronics, or electronics in general, industry.
The stuff is not "home-applicable" (eg you cant get it in a spray can).
its either applied via spin-coating using a solvent or polymer melt, vapor deposition, langmuir-blodget film, or some other standard polymer surface-modification method used in the field of materials science.
Patents differ by process and random distinctions in chemical structure:
C-10 vs c-11 carbon chains.... secondary vs tertiary branching points.... 5 fluorine atoms vs 6 fluorine atoms.
The result is minor processing, stability and integrity under extremely unrealistic conditions designed to expose the very differences that arise from these subtle patent-breaking strategies. |
|
robbinPremium,MVM
join:2000-09-21
Leander, TX
kudos:1 | said by monglobo :yeah, not really new or unique/special/rare...The stuff is not "home-applicable" (eg you cant get it in a spray can). Then obviously this new product is new, unique and special as it is "home-applicable".
"7. How is Ultra-Ever Dry applied?
Answer: The two-part system (top and bottom coat) is sprayed on using air sprayers, pump sprayers or even finger trigger sprayers." |
|
