| [TekTalk] Where to add SIP info in a SPA122 ATA Hi,
After a power failure, our ATA wouldn't connect. So I used the reset button in an attempt to get it connected again.
Now, I believe are ATA is missing the info it needs to establish a connection with Teksavvy VOIP.
So I received my SIP info from Teksavvy, but I'm not sure where to enter it. The ATA is a Teksavvy provided ATA, model number SPA122.
So where would I enter this info in the ATA configuration page.
Thanks. |
|
| Hi Steve,
We're already working on this with you on the direct forum. so we'll continue there. |
|
 JonFPremium
join:2012-11-22
Chatham, ON | reply to Steve23
Hello Steve 23,
I see that we have the ATA configured now, but is it working? If you need help let me know. |
|
|
|
